Oricom 610 manual Talk Back, $O Notopressetheh

22USING YOUR DIGITAL BABY MONITOR

)F THEH0ARENTEUNIT RECEIVES SOUNDUUP TO THEHLEVEL OF THEHlRST TWO ,%$S THEN THEYY WILL TURNNAMBERBBUT NO SOUNDUWILL BE HEARD IF THEHSOUNDURISES ABOVE THIS LEVELL then the unit will un-mute so you can hear the sounds.

1.To switch Mute Low on, press the button located on the top of the Parent unit. The Mute indicator will turn amber.

2.To switch Mute Low off, press the button again. The amber indicator will switch off.

Once the Mute Low sound threshold has been exceeded, baby sounds will be able to be heard for a

FURTHER SIX SECONDS EVENNIF THEYYDO NOT REACH THE -UTEA,OWWTHRESHOLD

Talk Back

9OU CANAUSESTHEH0ARENTEUNIT 4ALKL"ACKKFEATURE AS AAONENWAYYINTERCOM TO COMFORTT and reassure your baby. By speaking into the Parent unit your baby will hear

YOURUVOICE FROM THEH"ABYYUNIT 0LEASE NOTE THAT WHEN USINGI4ALK "ACKKYOU WILL

not be able to hear your baby until you release the button.

1.Press and hold down the button on the Parent unit to speak to your baby.

Whilst the button is depressed the display will show Talk and the green Link indicators will flash on both units.

9OU WILLWBE ABLE TO ACTIVATET4ALK "ACKKMODE EVEN IF OTHER FUNCTIONS HAVE BEENEACTIVATED ATATHE "ABYYUNIT like Music playback or Nightlight on.

Press or ONOTHE "ABYYUNIT TOIADJUST THE 4ALKL"ACKKVOLUMEULEVEL OF THEF"ABYYUNIT LOUDSPEAKER

$O NOTOPRESSETHEH	button when the Baby unit and Parent unit are positioned in the same room.
High-pitch noise will be generated if the		button is pressed when Baby unit and Parent unit are

close to each other or within 3 metres distance.

When using Talk Back, hold the Parent unit approximately 30cm in front of your mouth when talking to baby.