4 Preparation
4.1 Turning the System On/Off
To turn the system on, press ANSWER ON/OFF button once. The total number of recorded messages in two mailboxes appears on the display. The system is now set to answer calls. To turn the system off, press ANSWER ON/OFF button once.
4.2 Adjusting the Volume
Press VOL. 
button to increase the volume, or VOL. 
button to decrease the volume. The system beeps when you press either volume button. When the maximum volume is reached, the system beeps three times.
4.3 Setting the Day and Time
You must set the day and time before the system will start to record the day/time voice stamp on each incoming message. The day/time voice stamp automatically defaults to Monday, 12:00 AM, when you connect the system to power. The date and time do not advance until you set the correct day and time.
1.Turn on the system.
2.Hold down 
/ TIME SET button for about two seconds, then release it. The system announces “Monday”.
3.Repeatedly press 
/ TIME SET button until you hear the correct day.
4.Press 
/ TIME CHECK button. The system announces “twelve”.
5.Repeatedly press 
/ TIME SET button until you hear the correct hour.
6.Press 
/ TIME CHECK button. The system announces “0”.
7.Repeatedly press 
/ TIME SET button until you hear the correct minute.
8.Press 
/ TIME CHECK button. The system announces “AM”.
9.Press 
/ TIME SET button to select “PM”.
10.Press 
/ TIME CHECK button to confirm the setting. The system announces the current day of the week and the time.
11.To hear the current day and time, press 
/ TIME CHECK button.
4
