NOTE! Before installation, it is essential that you read the general information at
the beginning of this user guide.
3.2 Check contents of pack The following items are supplied in this pack:
One telephone base One telephone handset
One telephone line cord One curly cord
One power adaptor 2 AAA batteries
This user guide One warranty card
3.3 Connecting the telephone handset After unpacking your telephone, connect the telephone handset to the base unit.
First take one end of the curly cord and plug it into the socket on the handset.
Take the other end of the curly cord and plug it into the socket on the side of the
telephone base unit.
Install the batteries before connecting your telephone to the telephone socket or
power supply. In case of AC power failure, the batteries are required for the clock
display to function. However, the radio and alarm will not operate without mains
power.
1. Make sure that the telephone is not connected to the telephone network.
2. Locate the battery compartment on the underside of your telephone.
3. Open the battery compartment with a pen tip or a pointed object.
4. Insert the batteries, ensuring that the polarity is correct.
5. Close the battery compartment.
The battery must be changed when the display starts to dim.
Do not use rechargeable batteries, as these could possibly lead to a short circuit.
When replacing the battery use AAA 1.5V alkaline batteries. Do not throw
batteries into fire or immerse in water. Do not dispose of old or faulty batteries
with the normal household waste. Before installing or changing the batteries,
make sure that the telephone is not connected to the telephone network.
5
Connect the AC adaptor to the power socket and plug the cable into the jack marked DC 12V
on the back of the telephone. The power LED comes on to indicate the power supply is good.
The batteries should always be installed, even when using the mains power supply, to protect
against power interruption.