17
The picture setting have been adjusted at the factory under optimum signal reception conditions.
However, you can adjust for BRIGHTNESS, CONTRAST, COLOUR, SHARPNESS and TINT
to your preference.
PICTURE CONTROL
BRIGHTNESS CONTRAST COLOUR
NOTE: Each time the ENTER button is pressed,
the on screen display will change as
shown below.
1
3-aPress the SET UP or DOWN button
to select the PICTURE mode, then
press the ENTER button.
To adjust the BRIGHTNESS, press the SET UP or DOWN button, then press
the ENTER button.
Press the MENU button.
SET ENTER
MENU
NOTE:
SET ENTER
0
BRIGHTNESS
(Continued)
2
SHARPNESS
The picture setting can only be adjusted when they are displayed on screen.
TINT will appear only when the NTSC Color System is selected.
•
•
(TINT)
CH TUNING
ON/OFF TIMER SET
CLOCK SET
PICTURE
LANGUAGE
PRESS:+/-/ENTER/MENU