Orion 8891 Caring for the Mini 50mm Guide Scope, One-YearLimited Warranty, Cleaning the Lens

Aiming the Mini Guide Scope

The Mini 50mm Guide Scope is mounted in a dovetail bracket that has three black thumbscrews to the secure the guide scope tube in place. The tube is secured to the front of the bracket with a rubber O-ring. Although you may never need to do it in order to find a guide star, you can adjust the direction the guide scope is pointed within the bracket by alternately loosening and tightening the three thumbscrews. Just make sure that all three thumbscrews are tightened before you begin guiding. Do not over-tighten them, however, or you could strip the screw threads.

Caring for the Mini 50mm

Guide Scope

To keep dust from getting inside the guide scope and from accumulating on the objective lens, keep the front and rear caps installed when the guide scope is not in use. We recommend storing the guide scope in a padded accessory case.

Cleaning the Lens

Although it shouldn’t need cleaning very often, you can clean the front lens of the guide scope with any quality optical lens cleaning tissue and optical lens cleaning fluid designed for multi-coated optics. Never use regular glass cleaner or cleaning fluid designed for eyeglasses. Before cleaning with fluid and tissue, blow any loose particles off the lens with a blower bulb or compressed air. Then apply some clean- ing fluid to a tissue, never directly on the optics. Wipe the lens gently in a circular motion, then remove any excess fluid with a fresh lens tissue. Oily fingerprints and smudges may be removed using this method. Use caution, as rubbing too hard may scratch the lens. Never re-use tissues.

One-Year Limited Warranty

This Orion Mini 50mm Guide Scope is warranted against defects in materials or workmanship for a period of one year from the date of purchase. This warranty is for the benefit of the original retail purchaser only. During this warranty period Orion Telescopes & Binoculars will repair or replace, at Orion’s option, any warranted instrument that proves to be defective, provided it is returned postage paid to: Orion Warranty Repair, 89 Hangar Way, Watsonville, CA 95076. If the product is not registered, proof of purchase (such as a copy of the original invoice) is required.

This warranty does not apply if, in Orion’s judgment, the instrument has been abused, mis- handled, or modified, nor does it apply to normal wear and tear. This warranty gives you specific legal rights, and you may also have other rights, which vary from state to state. For further warranty service information, contact: Customer Service Department, Orion Telescopes & Binoculars, 89 Hangar Way, Watsonville, CA 95076; (800) 676-1343.

OrionTelescopes.com

89 Hangar Way, Watsonville, CA 95076

Customer Support Help Line (800) 676-1343

© 2011 Orion Telescopes & Binoculars

6 7