Figure 4: The TrailHead zoom spotting scope mounted in the view- through case (angled model shown).

is especially helpful in achieving a fast and convenient setup and will keep the exterior of the scope clean. The case can be sealed up quickly to protect the scope from the elements. Although the TrailHead is waterproof it should not be left outside for extended periods of time, even when it is in its carry case.

Make certain the TrailHead is oriented properly in the carry case so that the 1/4"-20 hole in the mounting ring can be used to attach the spotting scope to a tripod. Note that you cannot rotate the spot- ting scope while the TrailHead is in its carry case and mounted on a tripod

Care and Maintenance

Although the TrailHead zoom spotting scopes are durable and waterproof, it should avoid prolonged, unnecessary exposure to the elements. Keep the spotter in its case and indoors when not in use.

If it gets splashed with water, or is used in the rain, the spotting scope will not be harmed. It is internally purged with nitrogen and sealed, so water on the body or optics is not a problem. Simply wipe water off the body with a cloth or towel and use lens tissue to dry the objective and eyepiece lenses after a wet observing ses- sion. It is also recommended to leave the spotting scope in a dry place with the caps off overnight to let it completely dry out.

Store the instrument in a cool, dry place; storage in a humid environ- ment will result in mold growth on the exterior of the lenses that can destroy the optical coatings. This is not covered by the warranty.

Cleaning the Lenses

The lens surfaces of the TrailHead zoom spotting scopes are coat- ed with anti-reflection coatings, which can be damaged with care- less handling. Avoid touching lens surfaces with your fingers or any coarse material. Clean the lenses if they get noticeably dirty. The dust that builds up on them promotes mold growth, which etches the glass and destroys the coatings. Always use lens cleaning tis- sue and fluid designed specifically for telescope optical coatings.

Do not use regular tissue or fluids made for eyeglasses or house- hold use. Do not disassemble the spotting scope to clean it.

To clean the lenses, first blow air on the lens with a blower bulb or compressed air to remove any large particles. Then brush the lens with a soft lens brush and blow air on it again to remove any dislodged particles. Put two drops of lens cleaning fluid on a sheet of lens tissue (never directly on the lens). Wipe the lens gently with a circular motion, taking care to avoid undue pressure or rubbing, which can scratch the coatings. Quickly remove the excess fluid by wiping with a clean, dry lens tissue. For the large objective lens, clean only a small area at a time, using a fresh lens tissue on each area.

Specifications

#9520 15-45x65mm Straight

Objective lens diameter:

65mm

Magnification range:

15x to 45x continuous zoom

Field of view:

3° at 15x, 1.6° at 45x

Eye relief:

22mm at 15x, 21mm at 45x

Weight:

3 lbs.

Length:

15 inches

#9521 20-60x85mm 45° Angled

Objective lens diameter:

85mm

Magnification range:

20x to 60x continuous zoom

Field of view:

2.2° at 20x, 1.2° at 60x

Eye relief:

21mm at 20x, 18mm at 60x

Weight:

3.9 lbs.

Length:

16.5"

Both TrailHead models

Coatings:

Fully multi-coated

Close focus:

20 feet

Tripod attachment:

Mounting block accepts 1/4"-20 studs, spotting

 

scope can rotate relative to mounting block

Weather resistance:

Waterproof

Case:

Soft carry case included

Tripod:

Optional

One-Year Limited Warranty

The Orion TrailHead Spotting Scopes are warranted against defects in mate- rials or workmanship for a period of one year from the date of purchase. This warranty is for the benefit of the original retail purchaser only. During this war- ranty period Orion Telescopes & Binoculars will repair or replace, at Orion’s option, any warranted instrument that proves to be defective, provided it is returned postage paid to: Orion Warranty Repair, 89 Hangar Way, Watsonville, CA 95076. If the product is not registered, proof of purchase (such as a copy of the original invoice) is required.

This warranty does not apply if, in Orion’s judgment, the instrument has been abused, mishandled, or modified, nor does it apply to normal wear and tear. This warranty gives you specific legal rights, and you may also have other rights, which vary from state to state. For further warranty service information, contact: Customer Service Department, Orion Telescopes & Binoculars, 89 Hangar Way, Watsonville, CA 95076; (800) 676-1343.

 

 

 

Customer Support (800)676-1343

 

 

 

 

 

 

E-mail: support@telescope.com

 

 

 

 

 

Corporate Offices (831)763-7000

Providing Exceptional Consumer Optical Products Since 1975

OrionTelescopes.com

89 Hangar Way, Watsonville CA 95076

 

 

 

 

 

 

 

 

Page 2
Image 2
Orion Care and Maintenance, Cleaning the Lenses, Specifications #9520 15-45x65mm Straight, #9521 20-60x85mm 45 Angled