Single-Channel Bridged Configuration
●Lowest recommended impedance is 4W mono.
●Mono input must be used for this configuration. Only the Left input is used.
●Outputs can be configured for
●Outputs are configured for
Tri-Mode Three-Channel Configuration
●Lowest recommended impedance is 2W stereo and 4W bridged mono.
●Stereo operation must be used.
●Outputs must be configured for full range operation.
●Output is configured stereo and summed bridged.
●Passive crossovers must be used on all components and frequencies must not overlap.
WARNING! Failure to observe these requirements may result in damage to the amplifier.
©2003 Directed Electronics, Inc. | 9 |