Step 5: Install tweeter in flush mount housing..
Step 6: Connect the speaker wires observing the correct polarity..
Step 7: Install tweeter and housing in the hole cut for mounting, so that the trim ring is flat with the front of the surface..
Step 8: Use the supplied pressure ring to secure the housing to the surface..
Flush Mount
Tweeter
Assembly
Tweeter Cup
Pressure Ring
Figure 5
Figura 5
Abbildung 5
Flush Mount | Tweeter |
Trim Ring | Wire |
Panel
Wiring Harness
Installing the Crossover
Step 1: Find a location for the crossover away from any factory or after market electrical wires.. It is recommended to mount the passive crossover close to the amplifier..
Step 2: Mount the crossover using the supplied wire ties..
Step 3: Connect the wires.. Make sure the speaker wires for the midrange go to the mid/ woofer output and the tweeter to the tweeter output.. Be sure to observe the correct polarity.. Changing the polarity of the tweeter may be necessary for optimum sound quality..
6 | © 2008 directed |
