STEP BY STEP INSTALLATION

Step 1 Determine the location for the amplifier. Refer to the Mounting Locations section in this manual for detailed information.

Step 2 Decide on the system configuration for your amplifier. For system suggestions, refer to the System Planning section of this manual.

Step 3 Run all the wires from the amplifier location to the speakers, source unit and battery. Do not connect the battery at this time. Be sure to run RCAs, power and speaker wires away from factory electrical wires and system as they pose a great potential for induced system noise.

Step 4 Pre-drill amplifier mounting holes. Be sure to “think before you drill”. Gas tanks, fuel lines, and other obstructions have a nasty way of hiding themselves. For best results use a marking pen to mark the mounting holes and pre--drill these holes with a standard 1/8” drill bit.

Step 5 Mount the amplifier. Make sure the amplifier is mounted on a flat surface. If this is not possible, do not over tighten the screws such that the chassis of the amplifier is twisted or bent.

Step 6 Turn the vehicle’s key switch to the off position.

Step 7 Disconnect the vehicle’s battery ground terminal.

Step 8 Connect the RCA and speaker wires to the amplifier. Check the quality of your speakers and signal connections. This will determine the ultimate performance of your ORION amplifier. Refer to the Installation quick reference section of this manual for correct wiring instructions.

Step 9 Connect power wires to the amplifier. At this time do not connect the fuse at the main battery.

Step 10 Reconnect the ground terminal to the battery.

Step 11 Set crossover and signal routing configurations. Refer to the signal routing switches and the internal crossover configuration sections of this manual for detailed instructions.

Step 12 Once satisfied that all connections and settings are correct, install fuse at location near the vehicle’s battery and proceed to the testing the system section of this manual.

WARNING!!!! Never exceed the recommended fuse size of this amplifier. Failure to do so will result in the void of your warranty.

page 47

Page 47
Image 47
Orion Car Audio HCCA 225R, HCCA 250R, HCCA 275R, 250R & 275R owner manual Step by Step Installation

250R & 275R, HCCA 225R, HCCA 250R, HCCA 275R specifications

Orion Car Audio has long been a prominent name in the realm of high-performance audio systems, and their HCCA series amplifiers - specifically the HCCA 225R, HCCA 250R, and HCCA 275R - exemplify the brand's commitment to delivering powerful and high-quality sound for automotive enthusiasts. These amplifiers are designed to provide exceptional audio experiences, incorporating advanced technologies and features that enhance performance while ensuring reliability.

The HCCA 225R is a compact yet robust amplifier that delivers an impressive output of 225 watts RMS at 4 ohms, making it ideal for smaller setups while still producing a significant level of power. With a sleek design and a fully adjustable gain control, this model allows users to fine-tune their audio settings to achieve the best sound quality. It also includes a low-pass crossover, which helps to eliminate unwanted frequencies and enhances bass response.

Meanwhile, the HCCA 250R offers a step up in power output, delivering 250 watts RMS at 4 ohms. This amplifier also features a heavy-duty aluminum chassis, ensuring durability and effective heat dissipation during extended use. The HCCA 250R raises the bar with its capability to work seamlessly with subwoofers, providing deep, resonant bass tones that can truly elevate the listening experience. The user-friendly interface includes high and low-level inputs, catering to various installation needs.

For those who demand even more power, the HCCA 275R stands as a formidable option, producing 275 watts RMS at 4 ohms. This model incorporates advanced circuitry designed to reduce distortion and improve sound clarity. The HCCA 275R is equipped with a built-in variable bass boost feature, allowing audiophiles to customize their bass response further, enabling a more personalized sound profile.

All three models are engineered with performance in mind, boasting high-efficiency heat sinks, low-noise operation, and robust power supplies that ensure stability, even under heavy loads. Additionally, the HCCA series amplifiers come with comprehensive protection circuitry to safeguard against short circuits, thermal overload, and DC output, providing peace of mind while delivering high-quality sound.

In summary, the Orion Car Audio HCCA 225R, HCCA 250R, and HCCA 275R amplifiers offer remarkable audio performance characterized by power, versatility, and durability. With their advanced features and robust build quality, they cater to the needs of audiophiles looking to enhance their car audio systems, all while ensuring an exceptional listening experience.