AMPLIFIER SETTINGS
Signal Input and Output Configurations
Depending on your model, the input section of the amplifier consists of gain controls, high pass and low pass crossovers controls,
Input Gain
These Orion amplifiers have level adjustments to allow for easy integration with any source unit. The input sensitivity can be adjusted from 150mV to 5V. Refer to Testing the System and Adjusting the Sound of the System sections of this guide for detailed instructions on setting the gain.
Line Output Configurations
The line outputs on Orion amplifiers offer easy system expansion. Routing signal from the RCA line outputs to the next Orion amplifier’s RCA line inputs in the signal chain.
Internal Crossover Configurations
The crossover section of the Orion amplifier is continuously variable and extremely flexible. In addition to the variable
When using Orion loudspeakers, minor deviations from the recommended frequency ranges can provide superior results depending on your speaker locations and your vehicle acoustics. Setting crossover frequencies higher than recommended will not cause damage and may provide superior sonic results depending on your system's performance goals. Refer to your loudspeaker owner's manual for assistance in choosing the proper crossover frequencies for your system.
WARNING! DO NOT set crossover frequencies lower than the speakers recommended operating range. This can cause driver failure that is not covered by the man- ufacturer's warranty.
Crossover Switch
Controls the type of filter for the onboard active crossover. The
Full position does not attenuate any frequencies and is for full range speaker systems.
High attenuates low frequencies and is used for
Low attenuates high frequencies and is used for subwoofer speakers.
Intelli-Q
© 2005 Directed Electronics, all rights reserved | 9 |
