Orion Car Audio XTR102, XTR154, XTR122, XTR152, XTR124, XTR104 owner manual Wiring Configurations

WIRING CONFIGURATIONS

Series - One Speaker (dual 2 ohm voice coils)

One dual 2 ohm voice coil woofer with voice coils in connected in series results in a 4 ohm load to the amplifier.

	_	_
		_
	2 ohm	2 ohm
Figure 2		+
Figura 2
Abbildung 2	+	+

1.Connect the woofer in series by connecting the negative (-) of one terminal to the positive (+) terminal of the other coil.

2.Wire the positive (+) terminal of the first coil to the positive (+) terminal on the amplifier. Wire the negative (-) terminal of the second coil to the negative (-) terminal on the amplifier.

Parallel—One Speaker (dual 2 ohm voice coils)

One dual 2 ohm voice coil woofer with voice coils in parallel results in a 1 ohm load to the amplifier.

	_	_
		_
	2 ohm	2 ohm
Figure 3		+
Figura 3	+	+
Abbildung 3

1.Connect the speaker in parallel by connecting the two positive (+) terminals together and the two negative (-) terminals together.

2.Wire the positive (+) terminals of the woofer to the positive (+) terminal on the amplifier. Wire the negative (-) terminals of the woofer to the negative (-)

terminal on the amp.

4 © 2008 directed electronics—all rights reserved