Operation of Your Cordless Kettle

PRIOR TO FIRST USE

It is recommended that you clean your new kettle thoroughly before using it for the first time. To do this, fill the kettle with fresh water and boil. Discard the water and repeat. Discard the water and rinse the kettle with cold water. Follow the instructions as stated below.

Instructions for Regular Use

1.To fill the Kettle, hold and gently squeeze the handle. The Spout Cover will open.

2.Fill with the desired amount of water.

Note: Do not fill with less than the minimum level as indicated on the Kettle, or more than the maximum level as the water may spill over when boiling.

3.Plug Power Base cord into a power outlet.

4.Position the Kettle onto the Power Base so that the Switch Housing rests over the Switch. Press the ON/OFF Switch downwards, located at the back of

the Kettle. The water will start heating and the Kettle will switch off automatically once the water has boiled.

Note: Ensure that the reset lever is clear of obstructions. The Kettle will not turn off if the reset lever is constrained.

5.Lift the Kettle from the Power Base and pour the water.

6.The Kettle can be stored on the Power Base when not in use. The Kettle will not re-boil until the ON/OFF Switch is pressed downward.

Note: Ensure the power is turned off when kettle is not in use.

Should you accidentally allow the Kettle to operate without water, the boil dry mechanism will operate. If this should occur, allow the Kettle to cool before filling with cold water and re-boiling.

Cord Storage Facility

Excess cord can be stored by feeding the cord into Storage Cavity underneath the Power Base. Select any one of the 3 cord exits most convenient to connect the cord to a power outlet.

Care and Cleaning of Your Cordless Kettle

Mineral deposits in tap water may cause the water gauge and the inside of the Kettle to discolor after frequent use. To remove this build-up, fill the Kettle with 3 cups of white vinegar and the remainder with water and allow to stand overnight.

Empty the solution from the Kettle. Any stain remaining just inside the spout can be removed by rubbing with a damp cloth.

Fill the Kettle with clean water and bring to boil. Repeat and the Kettle will be then ready to use.

Always disconnect the appliance from the power point before cleaning. Never immerse the Kettle Switch area, cord, or the Cordless Power Base in water or allow moisture to come into contact with these parts.

The outside of the Kettle can be wiped over with a damp cloth.

CAUTION. Never use any chemical, steel wool, or abrasive cleaners to clean the outside of the Kettle.

5

Page 4 Page 6
Page 5
Image 5
Oster 3207 instruction manual Prior to First USE, Fill with the desired amount of water, Cord Storage Facility
Page 4 Page 6

3207 specifications

The Oster 3207 is a versatile and efficient blender that has gained popularity among home cooks and professional chefs alike. Engineered for both durability and performance, this kitchen appliance is designed to simplify meal preparation while providing exceptional blending capabilities.

One of the standout features of the Oster 3207 is its powerful motor, typically boasting a robust wattage that allows it to blend a wide variety of ingredients with ease. This strength enables the blender to crush ice, blend frozen fruits, and even process tougher vegetables, making it an ideal choice for smoothies, soups, and sauces.

The Oster 3207 features a unique stainless steel blade system. This design not only enhances the blending efficiency but also increases durability, reducing the risk of wear and tear over extensive use. The blades are crafted to create a vortex effect, pulling ingredients down towards the blades for a thorough and even blend. Whether you are preparing a creamy smoothie or a chunkier salsa, the blades provide consistent results.

Another notable aspect of the Oster 3207 is its user-friendly interface. The blender typically includes multiple speed settings and a pulse option, allowing users to customize their blending experience to achieve the desired texture and consistency. This flexibility is especially beneficial for those who engage in diverse culinary tasks, providing them with precise control over their blending process.

The pitcher of the Oster 3207 is usually designed with user convenience in mind. Made from durable, BPA-free plastic, the jar is lightweight yet sturdy, and many models feature measurement markings on the side for easy ingredient tracking. The lid is designed to fit securely, preventing spills during operation.

In terms of cleaning, the Oster 3207 often incorporates dishwasher-safe components, making cleanup quick and hassle-free. The overall design is intuitive, ensuring that even novice users can operate the machine with confidence.

The Oster 3207 combines technology and functionality, offering a powerful, reliable solution for anyone looking to enhance their cooking experience. With its robust features, durable construction, and user-oriented design, it stands as a valuable addition to any kitchen, whether for daily breakfasts or elaborate dinner preparations.
Top Page Image Contents