– | – |
BEFORE THE FIRST USE
•Remove any labels or stickers from appliance.
•Thoroughly wash lid, rice bowl, upper steaming bowl, lower steaming bowl, drip tray and heating element sleeve in warm, soapy water before first use, then rinse and dry carefully. The heating element sleeve must be installed around the heating element for proper operation.
•Wipe the inside of the water reservoir with a damp cloth.
INSTANT STEAM FUNCTION
Included is a removable heating element sleeve. Before cooking, when this sleeve is placed around the heating element,
the steam function will automatically produce steam in 35 seconds. Do not operate the steamer without the heating element sleeve.
PLEASE NOTE: The heating element sleeve may be removed to allow cleaning of the heating element. On the heating element sleeve, there is a small indentation (cut) which should face downward when replaced on the heating element.
USING YOUR STEAMER
Place unit on a flat, sturdy surface with adequate clearance (i.e., do not place under wall cabinets). The steamer unit and components are not for use in ovens (microwave, convection or conventional) or on stovetop.
(Step 1A) Fill water reservoir with clean water only. Do not put any other liquids or add any salt, pepper, etc., in the water reservoir. Make sure the water does not exceed the
HI fill level or go lower than the LO fill level as indicated inside the water reservoir. Then place the drip tray on the base. (Step 1B)
REMOVABLE HEATING
ELEMENT SLEEVE
STEP 1A
FILLING WATER RESERVOIR
STEP 1B
DRIP TRAY
