CARE & CLEANING
HOW TO CLEAN YOUR SKI LLET
Your DuraCeramic™ Skillet should be cleaned after every use.
1. Unplug the skillet and allow it to cool before cleaning.
NOTE: To protect the DuraCeramic™ coating, do not run cold water over cooking surface immediately after use.
2.Remove the temperature control probe. DO NOT IMMERSE TEMPERATURE CONTROL PROBE or SKILLET IN LIQUIDS.
3.Wipe down the cooking surface with a damp cloth and dry thoroughly. DO NOT use steel wool or other metal pads as this may scratch the surface.
4.The skillet is NOT dishwasher safe. You may wash it with hot soapy water, rinse and dry thoroughly.
CAUTION: TEMPERATURE CONTROL PROBE must always be completely dry before use.
For proper care of your DuraCeramic™ coated skillet, follow the following steps if suborn stains appear:
1.Sprinkle some baking soda on the stained area.
2.Add enough water to moisten the baking soda, making a paste like texture.
3.Let sit for a few minutes (for tougher stains let sit up to an hour).
4.Lightly scrub with a plastic scouring pad or damp cloth and dry thoroughly.
5.Repeat if necessary.
Should any stubborn stains appear, they will not affect the performance and
8www.oster.com
STORAGE AND MAINTENANCE
•Unplug cord and remove temperature controller. Allow appliance to cool before storing. Store your Electric Skillet in a dry location, such as on a tabletop or countertop, or on a cupboard shelf. Wind the electrical cord into a coil and secure with a twist fastener. For convenience, the temperature controller and cord can then be stored inside the skillet.
Other than recommended cleaning, no further user maintenance is necessary.
www.oster.com9
5/16/13 3:50 PM 
