BEFORE USING YOUR REFRIGERATOR
•Before connecting the refrigerator to the power supply, let the unit stand upright for 4 hours to reduce the possibility of the cooling system malfunctioning due to improper handling.
•Clean your refrigerator thoroughly before putting into use.
•Use the parts diagram to insure proper positioning of internal components.
TIPS FOR SAVING ENERGY
•Keep the refrigerator and freezer doors closed as much as possible, especially in warm/humid conditions.
•Maintain adequate ventilation around the back and sides of the refrigerator.
•Maintain a thermostat of “4” under normal use.
•Allow warm food to cool to room temperature before placing in the refrigerator or freezer.
•Excessive ice build up will increase energy consumption. Defrost the refrigerator and freezer when ice/frost is 1/4” thick.
INSTALLATION INSTRUCTIONS
•Install the refrigerator in a convenient location away from extreme heat and cold. Allow sufficient clearance between the refrigerator and sidewall so the door will open without obstruction. The refrigerator is not designed for recessed installation.
•Select a space with a strong, level floor. This unit is not recommended for carpeting or other soft, uneven surfaces.
•Allow 5 inches of space between the refrigerator’s side and the wall. In addition, sufficient clearance (160 degrees) should be maintained to allow the door to properly and completely open.
•The refrigerator must be correctly connected to the power supply.
•Do not use an extension cord.
•This refrigerator is not designed to be installed in an outside area such as a garage or porch. Ambient temperatures below 50 degrees or above 90 degrees will hinder the performance of the refrigerator.
•Wait
4
