Oster TSSTTVDFL1 user manual Using the Reheat Function See Fig

Models: TSSTTVDFL1

1 43
Download 43 pages 8.41 Kb
Page 18
Image 18

Using the Reheat Function (See Fig. 11)

Step 1. Turn the Function Knob to the Reheat function.

Default Temperature: 325ºF.

Default Time: 15 minutes.

You may manually activate the Turbo Convection Heat by pressing the Turbo button once to turn it on. The blue light of the Turbo button will turn on.

Step 2. To set the temperature:

Turn the Temperature Knob if you wish to increase or decrease the temperature setting. For the Reheat function, the temperature can be set from 150 to 450ºF in 5-degree increments.

Step 3. To set the time:

Turn the Time Knob if you wish to increase or decrease the reheating time. The maximum time setting for Reheat is 60 minutes (1 hour). Once you have selected the desired reheating time, press the Start button to initiate the reheating process.

Step 4. To Start:

Press the Start/Cancel Button to start the reheating process. The red Start/Cancel Button light will illuminate. The LCD Display will show the Reheat Function, the countdown time and the selected temperature. The unit will begin to work and the timer will start counting down.

When the Reheating cycle is complete, the unit will emit 3 beeps. The LCD and the Start/Cancel Button Light will turn off after 30 seconds.

NOTE: You can cancel the reheating cycle at any time by pressing the Start/Cancel Button once. The red Start/Cancel Button light will turn off whenever a function has been completed or a function is manually cancelled.

English-18

Figure 11

Page 18
Image 18
Oster TSSTTVDFL1 user manual Using the Reheat Function See Fig, Default Temperature 325ºF Default Time 15 minutes