Outback Power Systems M-Series warranty Series Specifications

MATE2M Specifications

The sealed OutBack M-Series inverter/charger is the most rugged design in the world. Conformal coated circuit boards, powder coated die-cast aluminum chassis with gaskets and o-ring seals keep out water and resist corrosion. Simply put, the sealed M-series is designed to work where other inverter/chargers were never intended to go.

The vented OutBack M-Series has the same proven technology and conformal coated circuit boards as the sealed version but offered in a vented chassis for higher power output. The fully screened “bug-proof” openings keep the power conversion components cool in very hot environments even when operated at high power for extended periods in more protected environments.

M-Series Specifications		Sealed Models
		FX2012MT	FX2524MT	FX2532MT
Nominal DC Input Voltage		12 VDC	24 VDC	32 VDC
Continuous Power Rating at 25° C		2000 VA	2500 VA	2500 VA
AC Voltage/Frequency		120 VAC 60 Hz	120 VAC 60 Hz	120 VAC 60 Hz
Continuous AC RMS Output at 25° C		17.0 amps AC	20.8 amps AC	20.8 amps AC
Idle Power	Full	≈ 20 Watts	≈ 20 Watts	≈ 21 Watts
	Search	2.6 Watts	2.6 Watts	2.6 Watts
Typical Efficiency		90%	92%	92%
Total Harmonic Distortion	Typical	2%	2%	2%
	Maximum	5%	5%	5%
Output Voltage Regulation		± 2%	± 2%	± 2%
Maximum Output Current	Peak	56 amps AC	70 amps AC	56 amps AC
	RMS	40 amps AC	50 amps AC	40 amps AC
AC Overload Capability	Surge	4800 VA	6000 VA	4800 VA
	5 Second	4000 VA	4800 VA	4000 VA
	30 Minutes	2500 VA	3200 VA	2500 VA
AC Input Current Maximum		30 amps AC	30 amps AC	30 amps AC
AC Input Voltage Range (MATE Adjustable)		80 to 150 VAC	80 to 150 VAC	80 to 150 VAC
AC Input Frequency Range		54.0 to 66.0 Hz	54.0 to 66.0 Hz	54.0 to 66.0 Hz
DC Input Range		10.5 to 17.0 VDC	21.0 to 34.0 VDC	28.0 to 45.3 VDC
Continuous Battery Charge Output		80 amps DC	55 amps DC	35 amps DC
Minimum Recommended DC Breaker		OBDC-250	OBDC-175	OBDC-125
Recommended Battery Cable		#4/0 AWG	#2/0 AWG	#2/0 AWG
Recommended Battery Types			Flooded lead acid,AGM, gel
Warranty			Standard 2 year / Optional 5 year
Certifications			ETL listed to UL458
Weight	Unit		56 lbs (25 kg)
	Shipping		67 lbs (30 kg)
Dimensions (H x W x L)	Unit	13 x 8.25 x 16.25” (33 x 21 x 41 cm)
	Shipping		21.75 x 13 x 22” (55 x 33 x 56 cm)

Vented Models
VFX2812M	VFX3524M	VFX3232M
12 VDC	24 VDC	32 VDC
2800 VA	3500 VA	3200 VA
120 VAC 60 Hz	120 VAC 60 Hz	120 VAC 60 Hz
23.3 amps AC	29.2 amps AC	26.6 amps AC
≈ 20 Watts	≈ 20 Watts	≈ 21 Watts
2.6 Watts	2.6 Watts	2.6 Watts
90%	92%	92%
2%	2%	2%
5%	5%	5%
± 2%	± 2%	± 2%
56 amps AC	70 amps AC	56 amps AC
40 amps AC	50 amps AC	40 amps AC
4800 VA	6000 VA	4800 VA
4000 VA	5000 VA	4000 VA
3200 VA	4000 VA	4000 VA
30 amps AC	30 amps AC	30 amps AC
80 to 150 VAC	80 to 150 VAC	80 to 150 VAC
54.0 to 66.0 Hz	54.0 to 66.0 Hz	54.0 to 66.0 Hz
10.5 to 17.0 VDC	21.0 to 34.0 VDC	28.0 to 45.3 VDC
125 amps DC	85 amps DC	45 amps DC
OBDC-250	OBDC-250	OBDC-175
#4/0 AWG	#4/0 AWG	#2/0 AWG
	Flooded lead acid,AGM, gel
	Standard 2 year / Optional 5 year
	ETL listed to UL458
	54 lbs (25 kg)
	62.2 lbs (28 kg)
	12 x 8.25 x 16.25” (30 x 21 x 41 cm)
	21.75 x 13 x 22" (55 x 33 x 56 cm)

The MATE2M is a complete management tool for your OutBack mobile power conversion system. The onboard CPU coordinates the operation of all your OutBack system components for maximum performance and smooth system integration.

A backlit LCD provides a display for system monitoring while four soft keys allow navigation of the menu system and adjustment of settings. Information for up to 10 inverter/chargers and other OutBack power conversion and control

products is available at your fingertips through the communications HUB. Your programmed settings are stored in permanent memory to eliminate the need to reprogram the system in the event of

a system shutdown or battery replacement.

The OutBack MATE2M includes a built in clock and calen- dar which allows timer based programming of power system operation. This enables the user to specify a generator’s run time to a specific time period of the day or week.

Operation	4 soft keys, dedicated inverter and AC input keys
Input	OutBack Cat5e RJ45 network cable
Output (RS232 model only)	RS232 serial to PC communication for data logging (optional software required)
Display	Back lit 4 line LCD
System Monitoring	AC/DC Voltage and Current Meters, Errors and Warnings
Adjustable Parameters	Shore Cord Amperage, Generator Start/Stop
Settings Memory	32k nonvolatile flash RAM
Dimensions HxWxD	4.5 x 6.25 x 1.5” (11 x 16 x 4 cm)
Weight	1 lbs (454 g)
Warranty	2 Year Standard / 5 Year Optional

Available From:

19009 62nd Avenue NE, Arlington, WA 98223

Phone: 360-435-6030 Fax: 360-435-6019 www.outbackpower.com