Outlaw Audio 7075, 7125, 7200 Specications

Outlaw Audio

Owner’s Manual

Speciﬁcations

Model 7200 Model 7125 Model 7075

Power Output (all channels driven) 7 x 200 watts RMS @ 8 ohms 7 x 125 watts RMS @ 8 ohms` 7 x 75 watts RMS @ 8 ohms

FTC: 20Hz to 20kHz, < 0.05% THD; FTC: 20Hz to 20kHz, < 0.05% THD; FTC: 20Hz to 20kHz, < 0.05% THD;

7 x 300 watts RMS @ 4 ohms 7 x 190 watts RMS @ 4 ohms 7 x 115 watts RMS @ 4 ohms

FTC: 20Hz to 20kHz, < 0.05% THD FTC: 20Hz to 20kHz, < 0.05% THD FTC: 20Hz to 20kHz, < 0.05% THD

Frequency Response (at rated output) 20Hz -20kHz ± 0.1 dB 20Hz -20kHz ± 0.1 dB 20Hz -20kHz ± 0.1 dB

Total Harmonic Distortion (THD) Less than 0.05% at rated output, Less than 0.05% at rated output, Less than 0.05% at rated output,

all frequencies; all frequencies; all frequencies;

less than 0.01% at 1kHz less than 0.01% at 1kHz less than 0.01% at 1kHz

Intermodulation Distortion (IMD) Less than 0.05% at rated output Less than 0.05% at rated output Less than 0.05% at rated output

Power Bandwidth 5Hz - >100kHz +0/-3 dB 5Hz - >100kHz +0/-3 dB 5Hz - >100kHz +0/-3 dB

Damping Factor Greater than 400 from 10Hz - 400Hz Greater than 400 from 10Hz - 400Hz Greater than 400 from 10Hz - 400Hz

Crosstalk Greater than -90dB from 20Hz - 20kHz Greater than -90dB from 20Hz - 20kHz Greater than -90dB from 20Hz - 20kHz

Gain Voltage gain of 28dB Voltage gain of 28dB Voltage gain of 28dB

Slew Rate 50V/Microsecond 50V/Microsecond 50V/Microsecond

Input Impedance Nominal 50k ohms Nominal 50k ohms Nominal 50k ohms

Input Sensitivity 1.43V for Full Rated Output 1.00V for Full Rated Output 1.00V for Full Rated Output

Remote Trigger Voltage 3 - 32V DC at 5mA or greater 3 - 32V DC at 5mA or greater 3 - 32V DC at 5mA or greater

Dimensions (HxWxD) 7.75” x 17.2” x 18” 5.0” x 17.2” x 16.2” 4.0” x 17.2” x 15.5”

Weight 90 lbs 51 lbs 41 lbs

Power Requirements 115VAC, ± 3%, 50Hz - 60Hz 115VAC, ± 3%, 50Hz - 60Hz 115VAC, ± 3%, 50Hz - 60Hz

1800 watts, maximum 1440 watts, maximum 1200 watts, maximum

Speciﬁcations