Painting your OWI Speakers
The speakers' other surfaces are primed to accept ordinary latex wall paint or aerosol spray paint. The surface of the speaker behind the grille should remain black and must not be painted. It is necessary to mask this area with the center of the template that you have cut out.
The grille can be painted as well, but great care must be taken not to clog the holes in the grille as this will greatly reduce the sound quality of the speakers. It is recommended that only light spray painting using 5 parts thinning agent to 1 part paint be used. Do not paint the grilles while they are attached to the speaker.
Proper Wire Gauge Selection
The gauge of wire required is determined by the distance between your amplifier/receiver and the speakers. Use the following chart as a guide:
Length | Minimum Gauge | |
Less than 10 feet | 18 | - 20 Gauge |
10 to 100 feet | 16 to 18 Gauge | |
Over 100 feet | 14 | Gauge |
OWI INC.
17141 KINGSVIEW AVENUE CARSON, CA 90746
TEL:
info@owi-inc.com
www.owi-inc.com
Page 3 of 4 | Filename:IC5_6 MANUAL |
| 08/29/07 |
