parts. If any problems are found, do not use tool until repaired.

Testing the Single Sequential Safety

Trip Mechanism

Even though the Stapler should be

empty during this procedure, ALWAYS point the Stapler at a piece of scrap wood when testing.

1.Make sure the tool is disconnected from the power supply.

2.Completely empty the magazine of staples.

3.The Stapler should not fire if the nose is not depressed against the workpiece.

4.Check that the Trigger (32) and the Safety Tip (38) move freely, without sticking.

5.Connect the air supply to the tool at the Air Inlet Plug (72) set at the recommended 60-120 PSI, and not to go over the maximum 120 PSI.

6.Test the tool by depressing the Safety Tip against the workpiece without pulling the Trigger. The tool must not cycle (fire). If it cycles (fires), stop immediately and take the tool to a qualified service technician.

7.Hold the tool away or off of the workpiece. The Safety of the tool should return to its original position. Squeeze the Trigger. The tool should not cycle (fire). If it cycles (fires), stop immediately and take the tool to a qualified service technician.

8.Depress the Safety Tip against the workpiece and squeeze the Trigger.

The tool must cycle (fire) once only. Release the trigger and squeeze it again.

The tool must cycle (fire) once only. With the Trigger held, carefully lift the nailer and press it against the workpiece

again. The tool must not cycle (fire). If it fails to act in the manner explained in bold, have it repaired by a qualified service technician.

Loading Staples

TO PREVENT SERIOUS INJURY

FROM ACCIDENTAL OPERATION, BEFORE LOADING:

•Wear ANSI-approved safety goggles with side shields. Other people in the work area must also wear ANSI-approved impact safety goggles with side shields.

•Release the Trigger.

•Detach the air supply.

•Attempt to fire the Tool into a piece of scrap wood to ensure that it is disconnected and is incapable of firing any fasteners.

1.Press down on the Latch (63) and pull back on Nail Guide Frame (51).

2.Insert a row of clean, undamaged staples onto the Pusher (50).

3.Push Nail Guide Frame forward until Latch snaps into place in Magazine (49).

General Operating Instructions

1.Test the Tool, as directed in the prior section, before each use.

2.If automatic oiler is not used, add a few drops of Pneumatic Tool Oil into the air inlet plug connection before use. Add a few drops more after each hour of continual use.

3.Attach the Stapler to the air supply at the Air Inlet Plug. Start your compressor and check the pressure, making sure it is set at the recommended 60-120 PSI and not to go over the maximum 120 PSI.

SKU 68018

For technical questions, please call 1-800-444-3353.

Page 11

Page 10 Page 12
Page 11
Image 11
OxiBrands 68018 manual Testing the Single Sequential Safety Trip Mechanism, Loading Staples, General Operating Instructions
Page 10 Page 12

68018 specifications

OxiBrands 68018 represents a significant advancement in the world of product designs aimed at enhancing user experiences. This innovative product embodies a blend of state-of-the-art technology and user-centric features tailored for diverse applications.

One of the standout features of OxiBrands 68018 is its highly efficient operation. Utilizing cutting-edge energy management technology, the device is designed to minimize power consumption without sacrificing performance. This makes it an eco-friendly choice that appeals to environmentally conscious consumers, reducing overall carbon footprints while maintaining high functionality.

The product boasts a durable and sleek design, ensuring that it not only performs well but also looks good in any setting. Its robust construction is engineered to withstand everyday use, enhancing longevity while providing a reliable solution for customers. The lightweight design also enhances portability, catering to users who prioritize convenience and ease of movement.

Incorporating advanced connectivity options, OxiBrands 68018 supports various smart technologies, including Bluetooth and Wi-Fi. This feature allows for seamless integration with other devices, enabling users to create a smart ecosystem. The intuitive interface, paired with an easy-to-navigate app, offers users the ability to customize settings according to their preferences, delivering a truly personalized experience.

One of the hallmark technologies present in OxiBrands 68018 is its adaptive response system, which leverages AI to learn user behaviors and preferences over time. By analyzing usage patterns, the product can automatically adjust its functionalities to better suit individual needs, making it an intelligent choice for modern consumers.

Moreover, safety is a top priority with OxiBrands 68018. It comes equipped with multiple safety features designed to protect users during operation. This includes overheat protection and short-circuit prevention technologies, giving peace of mind to users who prioritize safety along with performance.

In summary, OxiBrands 68018 stands out due to its energy efficiency, durability, advanced connectivity, intelligent adaptive response, and safety features. These characteristics work in harmony to offer users an exceptional product that is both practical and cutting-edge, making it a compelling choice in the competitive marketplace. Whether for personal or professional use, OxiBrands 68018 is positioned as a leader in its category, promising satisfaction and innovation for all who choose it.
Top Page Image Contents