Ozark Trail WMT-1410 manual Assembly Instructions

R-spring

ASSEMBLY INSTRUCTIONS

THIS RECREATIONAL PRODUCT REQUIRES TWO ADULTS TO ASSEMBLE.

*Unless otherwise specified all instructions will be given assuming the assembler is facing the front opening of the tent.

*Carefully fold out your poles, using caution to prevent snapping the shock-cording. Make sure each pole segment is “seated” into the next section before flexing the pole during set-up.

*Do not drop tent pole bag. Do not bounce tent bag on its end to remove tent, as these actions may damage the shock-cording and/or pole ends.

STEP 1: Verify Package Contents

Verify package contents by emptying contents of bag(s) and confirming all parts are included and undamaged. Do this at home before you leave on your trip.

STEP 2: Assembly Tent

A)Select a smooth level site and lay out your tent.

B)Extend all of your poles and sort into groups by style i.e. roof ridge poles, roof side poles, leg poles, eave poles, etc. This will simplify the assembly process.

C) Lay Center Roof Pole (CRPL- 375BK) in the center of tent, making sure that the center hub is secure in the middle by placing R-spring in the slot on hub.

D)Attach 3 Way Hub (3WAY-120-1) on each side of the center roof pole, making sure the reds match up.

E)Lay one of the Side Roof Poles (SRPL-375BK) on each side of the center roof pole, making sure that the center hub is secure in the middle by placing R-spring in the slot on hub.

F)Attach the 4 Way Hub (4WAY-071-2) on the left side of each Side Roof Poles (SRPL-375BK), and (4WAY-070-2) to the right side of the same poles.

G)Slide Roof Gable Pole (RGPL-137BK) into the corresponding hubs by matching the blue hub to the blue pole. Repeat with all other Roof Gable Poles.

4WAY-070-2

4WAY-071-2

I)The Corner Leg Poles (LPSA-168BK) will insert

into the hubs on all four cor- ners with the green tape. Insert the pin on the pin-rings at the base of the tent body into the end of each pole.

J)Take the Center Leg Poles (LPCA-168BK) and put into

purple opening on hubs in the center. Insert pins into pole ends.

K)Take the Eave Pole (EPOL-26BK) and put into yellow taped opening on all six hubs.

STEP 3: Installing the Rainfly

A)Drape rainfly over tent.

B)Attach Eave Poles to the rainfly by placing the pole ends in the pole pockets on

underside of rainfly. Use nylon fasten- ers on fly to secure poles. Use S-hooks on the corners and connect to the D- rings on the corner leg poles.

STEP 4: Stake Tent

A)Stake tent by driving stakes through the webbing loops around the base of tent.

B)To secure guy lines, find the guy

line plastic slider and look for the por- tion of the line opposite the knot. Pull this portion, forming a loop (works like a slip knot.) Extend guy line to ground and stake. Repeat with remaining guy lines.

STEP 5: Add Accessory Shelf

Attach shelf unit to tent by taking S-hooks and attaching them to the loops inside, located at the back of tent.

H)Position the tent body underneath the roof assembly. Hook S-hooks on tent body roof to the

holes in each corresponding hub. Also connect quick clips to the poles.

CAMPERS WANT TO KNOW

How can I stay cool and dry?

Partially unzip the upper window in your tent to remove unwanted moisture and condensation from perspiring sleepers. On muggy nights, also zip open a lower window to draw cooler air through to increase air circulation.