Packard Bell REFDOCS02420200 Removing the Right Side Cover, Removing the Front Bezel

Fig. 3: Removing the left side cover

To remove the right side cover, first remove the rear bezel (see section Removing the Rear Bezel) and then perform the following steps:

1.Remove the two screws that hold the right side cover.

2.Carefully slide the side cover two centimetres towards the front of the chassis.

3.Lift the side cover out and away from the chassis.

To remove the front bezel, first remove the rear bezel (see section Removing the Rear Bezel), remove the left side cover (see section Removing the Left Side Cover), and follow the steps below:

1.Gently unlock the three lateral latches that hold the front bezel and pull it away to the opposite side.

Fig. 4: Removing the front bezel

Packard Bell Stella (iXtreme) Disassembly Manual