CompactFlash Ethernet LAN Card is then turning into a conventional PCMCIA type II PC Card.

2.Align the PC Card toward the PC Card slot with brand label facing upward, as shown below.

Notebook

Connecting to the Network

1.Connect unshielded twisted pair (UTP) cable to the RJ-45 connector in the Attached Port of the CompactFlash card before loading any network driver.

For operation in the 10Mbps (10Base-T) Ethernet network, Category 3, 4 or 5 unshielded twisted pair (UTP) cable could be used to connect between the CompactFlash Ethernet LAN Card and a 10Mbps hub or switch.

Note

To remove the CompactFlash Ethernet LAN Card, please refer to the Compact Card removal instruction in the document for your PDA/Palm PC.

- 5 -