Page 10 PalmV™ Travel Kit Handbook
Performing a local HotSync operation
When you perform a local HotSync operation using the
HotSync cable, you must first make sure Palm™ Desktop
organizer software settings are correct on your computer.
To set up your PC for a local HotSync operation:
1. Click the HotSync Manager icon ™ from the System Tray
(bottom-right corner of the taskbar).
2. In the HotSync Manager menu in the System Tray, make
sure Local is checked.
3. From the HotSync Manager menu in the System Tray,
choose Setup.
4. Click the Local tab and adjust the connection setting options
as needed.
5. Click OK.
To set up your Macintosh for a local HotSync operation:
1. Click the HotSync Manager icon from the Instant Palm
Desktop menu (upper-right corner of your screen).
2. From the HotSync menu, select HotSync Setup, and on the
Serial Port Settings tab make sure Local is checked.
3. Adjust the Local Setup options as needed.
4. From the File menu, choose Quit.
ACCESSORIES.BOOK Page 10 Monday, January 11, 1999 3:21 PM