Palm TreoTM 1 2 , 3 , 4

Making a call

8 Treo

™ Wireless Headset

Do not hold the multifunction button down too long

when making, ending, or answering a call. This should be only a quick press, so

you don’t accidentally activate your headset’s enhanced features, described later

in this guide.

1 Make sure the headset is turned on.

2 Dial the number:

Using the phone’s keypad Dial the number on the keypad, and then

press the Send key.

Using voice-activated dialing Press and release the multifunction

button , and then say the name of the person you wish to dial when

you hear the tone.

The Treo 650 does not support voice-activated dialing

through Bluetooth wireless technology. For other phones check with

the manufacturer. You must set the voice tags on your phone to use

voice-activated dialing. For better reception, record the voice tags from

the headset.

3 Increase or decrease call volume by pressing the volume control

buttons . The tone volume increases or decreases to match the

call volume.

4 To end a call, press and release the multifunction button , or press

the button to end a call on your phone’s keypad.

IMPORTANT

[!]

NOTE

Paloma_UG.book Page 8 Wednesday, December 22, 2004 11:14 AM