Time On/ Alarm Channel
Setting Time On 
1 Press MENU button repeatedly to enter into Clock menu page.
2 Pressitem. CH- button repeatedly to select Time On 3 Press VOL+ or VOL- button to set On time.
After you finish setting Time On item, press the STANDBY 
button on the remote control. Then the TV set auto turns on when your preset time elapses.
!Notes:
The Alarm Channel item is available only after you finish setting Time On item.
Setting Alarm Channel 
1 Press MENU button repeatedly to enter into Clock menu page.
2 Press CH- button repeatedly to select Alarm Channel item.
3 Press VOL+ or VOL- button to select a channel number.
When the preset On Time elapses, the set auto turns on and goes to the channel set on the Alarm Channel item.
Clock
Sleep | 30 |
Timer | 00 : 10 |
Time Off | 00: 30 |
Time On | 07: 00 |
Alarm Channel 99 |
|
!Notes:
1.When you adjust time by VOL+ or VOL- button, the increasing/ decreasing step of time is 1 minute in every press. If you press and hold the button for more than 1 second, the step of time is 1 hour.
2.Once the functions of Time On or Time Off fulfil, you need to set the On Time or Off Time again if you want to use this function next time.
3.After you finish setting Time Off item, if the set auto goes to STANDBY because there is no signal input for a continuous 15 minutes, or if you turn off manually, then the preset Off Time will be cancelled. As the same way, turn on the set in advance will cancel the Time On and Alarm Channel settings.
4.Once you turn off the set by press the Power Switch, all settings in the Clock menu page will be cancelled in next time's turning on.
19
