To preset channels Manual search | Palsonic 6140G instruction

OPERATION

Tuning in (continued)

Use the MANUAL SEARCH function if desired channels can not be preset with the

AUTO SEARCH or if you would like to preset channels to specific position numbers one by one.

It is convenient to set the channel numbers to the same position numbers using MANUAL SEARCH and SKIP functions.

To preset channels (Manual search)

Manual search

If AUTO SEARCH can not preset the desired channels, or you want to preset the desired channels one by one with the preferred channel numbers, please make use of Manual search.

1.	Press the MENU button repeatedly to enter into the
	(PRESET) menu, or press the		or button to
	select POSITION. Press the	or		button

	to select a desired position number (from
	0~255)

Note: press the or button to select a channel number

within 0.7 seconds. Press and hold the or button for over 0.7 seconds to select a decimal number

POSITION	008
BAND	VHFL
SKIP	OFF
SEARCH
SEARCH
MFT
MFT
AUTO MEMORY
AUTO MEMORY

lllllllllllll

lllllllllllllllllllllllllllllllll

2.Press the or button to select SEARCH. Press the button to search channels from current channel to higher channel (the screen displays glittering " ").

Press the button to search channels from current channel to lower channel (the screen displays glittering " "). When a channel is located, the searching stops, this channel is then memorised with the preset position number.

Note:you can also make use of BAND selection to quicken the searching process in your desired band. Press the or button moves the band to the next step in the sequence below.