To preset channels Manual search | Palsonic 6820PF instruction

OPERATION

Tuning in (continued)

Use the MANUAL SEARCH function if desired channels can not be preset with the

AUTO SEARCH or if you would like to preset channels to specific position numbers one by one.

It is convenient to set the channel numbers to the same position numbers using MANUAL SEARCH and SKIP functions.

To preset channels (Manual search)

Manual search

If AUTO SEARCH can not preset the desired channels, or you want to preset the desired channels one by one with the preferred channel numbers, please make use of Manual search.

Press the MENU button repeatedly to enter into the

(PRESET) menu, or press the or

button to

POSITION

008

select POSITION. Press the

button

BAND

VHFL

to select a desired position number (from

SKIP

OFF

0~255)

MFT

Note: press the

button to select a channel number

AUTO MEMORY

llllllllllllllllllllllllllllllllllllllllllllll

within 0.7 seconds. Press and hold the

button

for over 0.7 seconds to select a decimal number

Press the

or button to select SEARCH. Press the

button to search channels from current channel to

POSITION

008

higher channel (the screen displays glittering ("

").

BAND

VHFL

Press the

button to search channels from current channel

SKIP

OFF

to lower channel (the screen displays glittering ("

").

MFT

When a channel is located, the searching stops, this channel

AUTO MEMORY

llllllllllllllllllllllllllllllllllllllllllllll

is then memorised with the preset position number.

Note: you can also make use of BAND selection to quicken the searching process in your desired band. Press the or button moves the band to the next step in the sequence below.