Palsonic TFTV663R owner manual Memorizing the Channels, Auto Tuning

Highlight Auto Tuning item, and press 4or OK to access.

Go to Input Source menu and select ATV or DTV first.

Memorizing the Channels

Note: If the Lock System is On, Auto Tuning/DTV manual tuning/ATV manual tuning can not be operated without password. For details, please see <Setting Child and Rating Locks> section.

When in PVR recording/time shifting, CHANNEL menu can not be accessed.

Auto Tuning

Auto Tuning will completely re-tune the TV and can be used to update the channel list.

It is recommended that Auto Tuning is run periodically to ensure that all new services are added. All current channels and settings, e.g. locked channels, will be lost.

PICTUREPicture	SOUNDSound	TIME	OPTION	LOCK	CHANNEL
Auto Tuning
DTV Manual Tuning
ATV Manual Tuning
Programme Edit
File System
	SELECT		MOVE	MENU	RETURN

PICTUREPicture	SOUNDSound	TIME	OPTION		LOCK	CHANNEL
Auto T
DTV	Country selection			Australia
ATV Manual		Start		Cancel
Programme
File System
	SELECT		MOVE		MENU	RETURN

Note:

As new services are broadcast, it will be necessary to retune the TV in order to view them.

1

2 Press MENU. Press 3or4to select CHANNEL menu, press 6to access.

3

4 Now a pop-up screen opens with Australia as default country and Start is highlighted. Now simply press OK to begin the auto tuning.(If you want to cancel, press4to select Cancel and press OK.)

All ATV/DTV channels available in your area will be searched and stored into memory. Please wait until the searching is complete.

5 During the process, if you want to skip, press MENU. To exit searching, press EXIT.

DTV manual tuning					- digital only -
PICTUREPicture	SOUNDSound	TIME	OPTION		LOCK	CHANNEL
Auto Tuning
DTV Manual Tuning
ATV Manual Tuning
Programme Edit
File System
	SELECT		MOVE		MENU	RETURN
	DTV Manual Tuning
	UHF	CH		23
	Please select channel then
	Press OK to search
	DTV			4
	Radio			2
	Bad	Normal		Good
	EXIT	MENU		SELECT

This feature is available for service engineers or can be used for direct channel entry if the multiplex channel is known.

1	In CHANNEL menu, press 6or5to select DTV Manual
	Tuning, then press4or OK to access.
2	Highlight UHF CH item, press 3or4button to select your
	desired multiplex number.
3	Press OK to begin the search for that multiplex.
	At the bottom of the menu screen the DTV Signal strength bar
	is displayed. You can make use of it to check how strong your
	DTV signal is and whether you need to adjust your antenna. The
	higher the signal strength is, the less likely you are to experience
	picture degradation.
4	When the multiplex is found, any channels that are not currently

in the channel list will be added and the channel information will be updated.

During the process, you can press MENU or EXIT to exit the search.

19