Uploading metadata [META DATA]

You can perform the following operations. If necessary make preparations.

••Loading metadata

Insert the memory card on which the metadata is recorded into the camera. (For details on clip metadata, see page 44.)

••Selecting whether to record the metadata on the memory card

••Initializing the metadata inside the camera

••Displaying the metadata inside the camera

1Turn the POWER/MODE switch to go into <CAMERA> mode.

2Press the <MENU> button. Menu operation (Page 28 of Vol.1)

3Tilt the OPERATION lever in the <><> directions to select [META DATA], and push the OPERATION lever (or tilt in the <> direction).

4Tilt the OPERATION lever in the <><> directions to select items, and push the OPERATION lever.

[CARD READ]:

Loads the metadata set on the memory card on to the camera.

Move to [CARD READ], push the OPERATION lever, select either [SLOT1]/[SLOT2]/[NO], and push the OPERATION lever.

••Up to eight items of metadata on the memory

 

 

card can be displayed, starting from the most

Shooting

recent creation date.

 

••If characters other than single-byte

 

alphanumeric characters are used in the

 

metadata file to be loaded they are displayed

 

 

as “*”.

 

[RECORD]:

 

Sets whether to record the metadata loaded on

 

the camera simultaneously on a memory card

 

when recording.

 

Select either [ON]/[OFF] (format/do not format),

 

and push the OPERATION lever.

 

The factory setting for this mode is [OFF].

 

[USER CLIP NAME]:

 

The [USER CLIP NAME] recording method is

 

selectable. For details, see the next column.

 

[META DATA PROP]:

 

Displays the metadata recorded in the camera.

 

[CLIP COUNTER RST]:

 

Resets the counter value to 1.

 

Select either [YES]/[NO] (reset/do not reset),

 

and push the OPERATION lever.

 

[META INIT SET]:

 

Initializes the metadata recorded in the camera.

 

Select either [YES]/[NO] (initialize/do not

 

initialize), and push the OPERATION lever.

 

5Press the <MENU> button to release menu mode.

Selecting the [USER CLIP NAME] recording method

Press the <MENU> button and select [META DATA][USER CLIP NAME] to select the [USER CLIP NAME] recording method. Two options are available: [TYPE1] and [TYPE2].

[USER CLIP NAME] to be recorded

 

[TYPE1]

[TYPE2]

 

 

 

 

 

Uploaded data

When clip metadata

Uploaded data

+

has been loaded

COUNT

 

 

value*

 

 

 

When no clip

 

 

metadata has been

Sequential

Sequential

loaded, or when

5-digit number

5-digit number

recording of loaded

in the order of

in order of

clip metadata has

shooting

shooting

been disabled

 

 

45