4 Use the CH1 SELECT switch to select the input signal to be recorded to audio channel 1. INT (L):

Audio from the built-in microphone Lch is recorded to audio channel 1.

INPUT 1:

Audio from a device connected to INPUT 1 terminal is recorded to channel 1.

INPUT 2:

Audio from a device connected to INPUT 2 terminal is recorded to channel 1.

5 Use the CH2 SELECT switch to select the input signal to be recorded to audio channel 2. INT (R):

Audio from the built-in microphone Rch is recorded to audio channel 2.

INPUT 2:

Audio from a device connected to INPUT 2 terminal is recorded to channel 2.

•When inputting the microphone signal to channels 1 and 2, connect the microphone to INPUT 2 and switch both CH1 SELECT and CH2 SELECT to INPUT 2.

Adjusting the recording level

AUDIO control knobs

 

Use the AUDIO control knobs to adjust the

 

recording level of the built-in microphone or of

 

audio signals input through the INPUT 1/2 (XLR

 

 

3-pin) terminals.

Shooting

To adjust the volume of the sound for monitoring.

 

(Page 44)

 

To adjust the recording level of the audio signals,

 

turn the AUDIO control knobs while referring to

 

 

the audio level meter at the bottom left of the

 

viewfinder and LCD monitor, regardless of the MIC

 

ALC option setting (Page 91) on the RECORDING

 

SETUP screen of the setting menu.

 

•Check the recording volume level prior to shooting.

•The recording level of this camera is set approximately 8 dB higher than Panasonic broadcasting camera recorders (AJ series products).

49