AV OUT SETUP screen

Item

Display

 

Description of settings

mode

 

 

 

 

 

 

 

 

 

 

 

 

HDMI OUT SEL

(Camera)

Sets the output video format of the HDMI OUT terminal.

 

(PB)

AUTO: Automatically determines the output resolution based on information of

 

 

 

connected monitors.

 

 

FIX:

Fix the output at the recorded resolution.

 

 

 

(Output in 1080 interlaced or 720 progressive mode)

 

 

576P:

Output in 576 progressive mode.

 

 

• Simultaneous HDMI and component output is possible only in FIX mode.

 

 

• There will be no VIDEO OUT output when connected with an HDMI cable if this

 

 

item is set to anything other than FIX.

CMPNT OUT

(Camera)

Selects the type of component terminal.

SEL

(PB)

AUTO: Monitor with D4 terminal (720P/1080i output)

 

 

1080i:

Monitor with D3 terminal (1080i output)

 

 

576i:

Monitor with D1 terminal (576i output)

 

 

• Cross-conversion is only performed when content recorded at 720P is output at

 

 

1080i. Cross-conversion does not take place in other cases.

DOWNCON

(Camera)

Switches down-conversion output mode.

MODE

(PB)

SIDE CROP: Crops the right and left edges of the image for a 4:3 aspect ratio.

 

 

• Images may extend beyond the boundaries of the screen and be partially

 

 

unable to be seen when outputting from the VIDEO OUT terminal, or when

 

 

outputting from the COMPONENT OUT terminal when the COMPNT OUT SEL

 

 

item is set to 576i.

 

 

LETTER BOX:Adds black bands at the top and bottom of the image to display

 

 

 

16:9 images on a 4:3 screen.

 

 

SQUEEZE: Squeezes 16:9 images horizontally when displaying on a 4:3

 

 

 

screen.

AUDIO OUT

(Camera)

Sets the audio signals to output from the AUDIO OUT pin jack.

 

(PB)

CH1/CH2: CH1 terminal = CH1 signals, CH2 terminal = CH2 signals

 

 

CH1:

CH1 terminal = CH1 signals, CH2 terminal = CH1 signals

 

 

CH2:

CH1 terminal = CH2 signals, CH2 terminal = CH2 signals

 

 

• When an SD Memory Card containing 5.1 channel content, recorded on other

 

 

equipment, is played back on the camera, it is down-mixed to 2 channels when

 

 

output through the AUDIO OUT or headphone terminal.

HP MODE

(Camera)

Selects the sound heard through the headphones.

 

 

LIVE:

The sound which has been input from the microphone is output as

 

 

 

is. This setting is selected when delays in the sound are annoying.

 

 

RECORDING: The sound in the status which is to be recorded (the sound

 

 

 

synchronized with the images) is output.

 

 

 

 

 

indicates the factory setting.

Menu

93