Maintenance

Condensation

If the unit is moved from a cold location to a warm location or used in areas with high humidity, the moisture in the air may adhere as water droplets on the head drum. This is called condensa- tion, and if the tape is run under these conditions, it will easily stick to the drum. Therefore, the following points should be observed.

ÁIf the unit is moved under conditions where condensation may occur, eject the tape.

ÁBefore inserting the tape, set the POWER switch to ON and check that the HUMID display in the display window is not lighted. If the HUMID display is lighted, do not insert the tape until the display goes off.

The HUMID display is not lighted.

Cleaning the Video Heads

Use the AJ-CL12MP cleaning cassette when head cleaning is required. Improper use of the cleaning cassette may damage the video heads. Therefore, read the Handling Instructions for the cleaning tape carefully before use.

Cleaning the Viewfinder (The viewfinder is an optional accessory with the AJ-D900WA.)

ÁDo not use thinner or other solvents to remove dirt from the viewfinder. ÁWipe the lens with lens cleaner available on the market.

ÁAbsolutely do not wipe the mirror. If dirt, etc. has adhered to the mirror, remove it using a air blower available on the market.

Characteristic Phenomenon of CCD Cameras

Smear

Smear occurs when shooting high-intensity subjects, and occurs more easily as the electronic shutter speed increases.

– 128 –