Specifications

VTR Section

VTR Video System (during playback on a standard playback unit)

Bands:

Y; 30 Hz to 5.75 MHzo1.0 dB/p3.0 dB

 

PB, PR; 30 Hz to 2.75 MHzo1.0 dB/p3.0 dB

S/N ratio:

Better than 55 dB

K factor (2T pulse):

Within 2%

Y/C delay:

Within 30 ns

VTR Audio System (during playback on a standard playback unit)

Sampling frequency:

48 kHz (synchronized to video)

Quantization:

16-bits/sample

Frequency response:

20 Hz to 20 kHzt1.0 dB (at the reference level on MIC

 

LOWCUT OFF status of the Setting Menu)

Dynamic range:

85 dB or more (at 1 kHz, AWTD)

Distortion:

Within 0.1% (at 1 kHz, reference level)

Wow/flutter:

Below measurable limit

Head room:

20 dB

Emphasis:

T1r50 ¯s, T2r15 ¯s (can be turned ON/OFF)

VTR Tape Running System

Tape used:

DVCPRO format 1/4-inch M-size cassette tape

Tape speed:

67.640 mm/s (50 Mbps)

 

33.820 mm/s (25 Mbps)

Recording/playback time:

Approx. 33 min. (50 Mbps, using AJ-P66MP)

 

Approx. 66 min. (25 Mbps, using AJ-P66MP)

FF/REW time:

Approx. 3 min. (using the AJ-P66MP)

Connectors

 

Input

 

AUDIO IN CH1/CH2

 

(XLR, 3-pin, female):

MIC/LINE switchable, balanced, more than 10 kohm

 

MIC; Phantom o48 V ON/OFF switchable

 

Menu setting to p60/p50/p40 dBu

 

LINE; Menu setting to p6/0/o4 dBu

MIC IN (XLR, 3-pin, female):

Phantom o48 V ON/OFF switchable,

 

Menu setting to p60/p50/p40 dBu, balanced, 3 kohm

GENLOCK IN (BNC)

 

(also serves as VIDEO IN):

1.0 Vp-p, 75 ohm

 

[Signal can be checked by viewing the EVF.GENLOCK

 

(VIDEO) signal can be recorded by selecting the menu.]

TIME CODE IN (BNC):

0.5 to 18 Vp-p, 10 kohm

Output

 

CAMERA OUT (BNC):

1.0 Vp-p, 75 ohm

VIDEO OUT (BNC):

1.0 Vp-p, 75 ohm

AUDIO OUT

 

(XLR, 3-pin, male):

o4 dBu, balanced, low-impedance

 

(CH1, CH2 or MIX selectable)

TIME CODE OUT (BNC):

1.5 Vp-p, 75 ohm

PHONES (mini-jack·2):

 

Other

 

DC IN (XLR, 4-pin, male):

DC 12 V

DC OUT (4-pin):

DC 100 mA

LENS (12-pin):

 

REMOTE (ECU, 6-pin):

 

Accessories

Shoulder belt (1)

Sony battery connector (screws included)

Weight and dimensions shown are approximate.

Specifications are subject to change without notice.

– 134 –