Power Supply

Power can be supplied to the unit using a battery pack or AC power supply.

Using a battery pack

APanasonic, B Anton Bauer or C Sony batteries can be used for the battery pack.

Before using a battery pack, be sure to charge it completely using a battery charger.

ÁSee the Handling Instructions for the battery pack and battery charger for a detailed explanation of charging methods.

Using an Anton Bauer Battery Pack

1 Mount the battery pack.

Insert the battery pack in the direction of the arrow and then slide it into place.

Power Supply Output Connector

Control Switch

2 When detaching the battery, hold down the detachment lever of the battery holder and slide the battery pack in the direction of the arrow.

Lever

Pack

Note{

The unit supports the intelligent battery system and the ultra-light system.

Automatic detection can be performed for intelligent batteries with a remaining battery level of 10% or more. At this time, the remaining battery level is displayed numerically (percent- age display) inside the viewfinder. If the power is turned on with a remaining battery level of 10% or less, the voltage is displayed. Also, after intelligent battery detection, the remaining battery level display indicates the level for the intelligent battery even if power is supplied from an external source.

– 23 –