Setup Card Operations
Setup Card Data Operations
Operations to store setting data on setup cards and read out stored data are performed at the SET UP CARD page of the setting menu.
Note{
When operating the unit with a remote controller, the SET UP CARD page cannot be operated from the unit.
Formatting setup cards
1 Set the MENU SET/OFF switch to SET. The page on which the previous setting menu operations were completed appears on the viewfinder screen. (When the menu is used for the first time, the first page appears.)
2 Press the MENU switch repeatedly until the SET UP CARD 1/2 page shown below appears. (This operation can also be performed using the PAGEoUP/DOWN function.)
- SET UP CARD 1 / 2 -
READ USER | DATA |
¢ |
|
READ |
|
SE L ECT | 0 |
WR I TE |
|
SE L ECT | 0 |
CARD CONF I G |
|
READ USER | DATA |
READ |
|
SE L ECT | 0 |
WR I TE |
|
SE L ECT | 0 |
CARD CONF I G |
|
¢ |
|
CONF I G? ( Y : UP , N : DOWN )
5 Press the UP button to format the set up card. When the setup card has been formatted, the message shown below appears.
Note{
When setup cards are formatted, the setting conditions at that time are also input simulta- neously.
- SET UP CARD 1 / 2 -
READ USER | DATA |
READ |
|
SE L ECT | 0 |
WR I TE |
|
SE L ECT | 0 |
CARD CONF I G |
|
¢ |
|
FORMAT OK
6 When menu operations have been completed, return the MENU SET/OFF switch to OFF. The setting menu disappears from the viewfinder screen and the displays indicating the unit’s current status appear at the top and bottom of the viewfinder screen.
– 82 –