Setup Card Operations
Writing set data to cards
1 Set the MENU SET/OFF switch to SET. The page on which the previous setting menu operations were completed appears on the viewfinder screen. (When the menu is used for the first time, the first page appears.)
2 Press the MENU switch repeatedly until the SET UP CARD 1/2 page shown below appears. (This operation can also be performed using the PAGEoUP/DOWN function.)
- SET UP CARD 1 / 2 -
READ USER | DATA |
¢ |
|
READ |
|
SE L ECT | 0 |
WR I TE |
|
SE L ECT | 0 |
CARD CONF I G |
|
3 Press the SHIFT/ITEM button repeatedly to move the cursor to the WRITE position. 4 A menu shown below appears when the UP (or DOWN) button is pressed.
- SET UP CARD 1 / 2 -
READ USER | DATA |
READ |
|
SE L ECT | 0 |
WR I TE |
|
¢ |
|
SE L ECT | 0 |
CARD CONF I G |
|
WR I TE ? ( Y : UP , N : DOWN )
5 Press the UP button to write data on the set up card. When writing is complete, the message shown below appears.
- SET UP CARD 1 / 2 -
READ USER | DATA |
READ |
|
SE L ECT | 0 |
WR I TE |
|
¢ |
|
SE L ECT | 0 |
CARD CONF I G |
|
WR I TE OK
6 When menu operations have been completed, return the MENU SET/OFF switch to OFF. The setting menu disappears from the viewfinder screen and the displays indicating the unit’s current status appear at the top and bottom of the viewfinder screen.
– 84 –