Panasonic AJ-HD150 manual 62

Setup menus

USER menu

<EDIT> (continued)

	Item		Setting					Description
No.	Superimposed	No.		Superimposed
	display			display
311	JOG REV	0000				–4.1	This sets the maximum JOG REV speed.
	MAX	0001				–1.85	0: –4.1⋅	speed
		0002				–1	1: –1.85⋅	speed
		0003				–0.43	2: –1⋅speed
							3: –0.43⋅	speed
							<Notes>
							• The maximum speed is set to –1⋅when the dial on the front
							panel is operated.
							• At any speed setting other than 1 (–4.1⋅), the phase cannot
							be synchronized from an editing controller which synchro-
							nizes the phase using the JOG command.
312	POSTROLL	0000				0s	This sets the postroll time.
	TM	0001				1s	Any time from 0 to 5 seconds can be set in 1-second units.
		0002				2s
		0003				3s
		0004				4s
		0005				5s
320	EDIT	0000				N-DEF	This sets the channel assignments for the controller’s analog
	RPLCE1	0001				CH1	audio preset when editing the digital audio of the VTR using a
		0002				CH2	controller which does not have a digital audio edit preset
		0003				CH1+2	control function.
							This selects the channel concerned when the VTR CH1 edit
							preset is set in compliance with the ON or OFF presetting for
							the analog audio signals designated by the controller.
							0: Not set.
							1: Compliance with analog CH1 edit preset.
							2: Compliance with analog CH2 edit preset.
							3: Compliance with either analog CH1 or CH2 edit preset.
321	EDIT	0000				N-DEF	The same type of setting as setup menu No. 320. This selects
	RPLCE2	0001				CH1	the channel concerned when the CH2 edit preset is set in
		0002				CH2	compliance with the ON or OFF presetting for the analog
		0003				CH1+2	audio signals designated by the controller.
							0: Not set.
							1: Compliance with analog CH1 edit preset.
							2: Compliance with analog CH2 edit preset.
							3: Compliance with either analog CH1 or CH2 edit preset.
322	EDIT	0000				N-DEF	The same type of setting as setup menu No. 320. This selects
	RPLCE3	0001				CH1	the channel concerned when the CH3 edit preset is set in
		0002				CH2	compliance with the ON or OFF presetting for the analog
		0003			CH1+CH2		audio signals designated by the controller.
							0: Not set.
							1: Compliance with analog CH1 edit preset.
							2: Compliance with analog CH2 edit preset.
							3: Compliance with either analog CH1 or CH2 edit preset.
323	EDIT	0000				N-DEF	The same type of setting as setup menu No. 320. This selects
	RPLCE4	0001				CH1	the channel concerned when the CH4 edit preset is set in
		0002				CH2	compliance with the ON or OFF presetting for the analog
		0003			CH1+CH2		audio signals designated by the controller.
							0: Not set.
							1: Compliance with analog CH1 edit preset.
							2: Compliance with analog CH2 edit preset.
							3: Compliance with analog CH1 or CH2 edit preset.

The underline on the setting item denotes the initial setting.

– 62 –