Scene File Operations
Loading the saved data
Example: Loading data into scene No.3 |
|
| START/STOP | |
1 Select the scene number from | REW | FF | ||
| ||||
which the data is to be loaded. |
|
|
| |
1 Press the S3 button. |
|
|
|
ENGLISH
REW | FF | START/STOP | |
| |||
S1 | S2 | SAVE | |
STOP | PLAY | ||
REC CHK | |||
S3 | S4 | LOAD |
The selected scene No. button now blinks.
<Notes>
≥To change to another scene No., simply press the button that corresponds to that scene No.
≥To release the scene No. selection, press the scene No. button which is now blinking again.
2 Load the setting data.
1Press the LOAD button within 10 seconds of performing the operation in
S1 | S2 | SAVE | |
STOP | PLAY | ||
REC CHK | |||
S3 | S4 | LOAD |
The load operation is completed when both the scene No. button used to load the data stays on and the LOAD button comes on.
<Note>
After the data has been loaded, the operation mode (scene mode) prescribed by the loaded scene data is established, and the KNEE SLOPE, KNEE POINT, DETAIL, GAMMA and M.PED VR control operations differ slightly from their regular operations. For further details, refer to the section entitled “Operation mode established by scene file data <scene mode>.”
REW FF
START/STOP
S1 | S2 | SAVE | |
STOP | PLAY | ||
REC CHK | |||
S3 | S4 | LOAD |
While the data is being loaded, the selected scene No. button stops blinking and comes on.