Scene File Operations
Operation mode established by scene file data <scene mode>
In the scene mode established upon completion of the scene data saving or loading operations, the KNEE SLOPE, KNEE POINT, DETAIL, GAMMA and M.PED VR control operations differ slightly from their regular operations.
Regular operations: The control positions are sent to the camera recorder as menu data information.
Operations in scene mode: The data and control positions immediately after scene data saving or loading serve as the reference for operation. In the case of the control data, the changes from the data immediately after saving or loading are sent to the camera recorder.
<Notes>
≥Depending on the positions of the controls during saving and loading, the lower or upper limits of the data variable ranges may be exceeded by the control variable ranges. In this case, when a particular control is operated after saving or loading, its data will be changed as normal up to the lower or upper limit, but the data will not change any further once the limit is exceeded. Furthermore, when a particular control is stopped at the position where the lower or upper limit is exceeded, this stopped position will serve as the position that indicates the lower or upper limit value.
≥While the scene mode is established, the VTR operations can be performed by setting the VTR/SCENE enable switch to REC ONLY or VTR ON just as with regular operations.
ENGLISH
Releasing the scene mode
To release the scene mode, proceed as follows. As soon as the regular operation mode has been restored from the scene mode, the KNEE POINT, KNEE SLOPE, DETAIL, GAMMA and M.PED VR control item data changes to the control position data which was established at that point when the scene mode was released. Furthermore, the data established during the scene mode is used as is for all data with the exception of the control data.
Example: Scene No.2 while the scene mode is established
REW | FF | START/STOP | |
| |||
S1 | S2 | SAVE | |
STOP | PLAY | ||
REC CHK |
1Press the LOAD button.
REW | FF | START/STOP | |
| |||
S1 | S2 | SAVE | |
STOP | PLAY | ||
REC CHK | |||
S3 | S4 | LOAD |
All the button LEDs now go off.
<Notes>
≥The scene mode is automatically released when the power of the camera recorder and HEAD POWER switch on the base station are turned off.
≥The scene is also automatically released when the saving operation has failed and there is no data to be loaded.
S3 S4 LOAD
The selected scene No. button and LOAD button are on.