Specifications

[GENERAL]

Power supply: AC 100 – 240 V, 50 – 60 Hz

Power consumption: 120 W (with all options)

indicates safety information.

Operating ambient temperature:

41°F to 104°F (5°C to 40°C)

Operating ambient humidity:

10% to 80% (no condensation)

Weight:

AJ-SD930 : 32.78 lb (14.9 kg)

AJ-SD955A : 33.0 lb (15.0 kg)

Dimensions (WaHaD):

16 3/4a6 15/16a16 15/16 inch (424a175.2a430 mm)

(Not including the support legs, connectors, and JOG dial)

Recording format:

DVCPRO50/DVCPRO format selectable

Recording video signal:

AJ-SD930 : 525i system

AJ-SD955A : 525i/625i system selectable

Recording audio signal:

DVCPRO50:

48 kHz 16-bit 4 channels

DVCPRO:

48 kHz 16-bit 2 channels

Recording tracks:

Digital video audio: helical track

The time code is recorded in the sub-code area. Cue track:

1track

Control track:

1track

Tape speed:

[525i system]

67.640 mm/sec (DVCPRO50)

[625i system] SD955A

67.708 mm/sec (DVCPRO50)

Recording time:

92 minutes (using the AJ-5P92LP)

33 minutes (using the AJ-5P33MP)

Tape:

Metal tape

FF/REW time:

Less than 3 min (with AJ-5P92LP)

Less than 2 min (with AJ-5P33MP)

Digital slow:

–0.43ato +0.43a, +0.5a, +0.75a speed (DVCPRO, DVCPRO50)

Editing accuracy:

±0 frames (using the time code)

Tape timer accuracy:

±1 frame (using the continuous CTL signal)

Servo lock time:

Less than 0.5 sec (color framing/standby ON)

[VIDEO]

$Digital video

Sampling frequencies:

Y:13.5 MHz, PB/PR: 6.75 MHz (DVCPRO50)

Quantizing:

8 bits

Video compression method:

DV-Based compression (SMPTE 314M)

Video compression rate:

DVCPRO50: 1/3.3,

DVCPRO: 1/5

Error correction:

Reed-Solomon product code

Bit rate:

DVCPRO50: 50 Mbps,

DVCPRO: 25 Mbps

$Digital IN/Analog Component OUT

Video bandwidth:

[525i system]

Y: 30 Hz to 5.75 MHz (±0.5 dB) PB/PR : 30 Hz to 2.75 MHz (±0.5 dB)

[625i system] SD955A

Y: 25 Hz to 5.75 MHz (±1.0 dB) PB/PR : 25 Hz to 2.75 MHz (±1.0 dB)

S/N ratio:

Better than 60 dB

Kfactor:

Less than 1%

Y/PB, PR delay:

Less than 10 ns

$Video input connector

Analog component input (option):

BNCa3 (Y, PB, PR)

Y:1.0 V [p-p], PB/PR: 0.486/0.7 V [p-p] switchable,

75Ω (75% color bar, 7.5% setup)

Analog composite input (option):

BNCa2, loop-through, 75Ω on/off

VIDEO:1.0 V [p-p] (75Ω)

Reference input:

Analog composite, BNCa2, loop-through, 75Ω on/off

Serial digital component input:

BNCa2, active through, complies with SMPTE 259M-C standard

SDTI input (option):

BNCa1, complies with SMPTE 305M/321M standard

77