-39-
#0 Auto Iris Level Fine Adjustment [Auto Iris
Adjust: ON/OFF]
ON: Fine adjustment of auto iris convergence
level can be made with the iris control when
the iris switch on the RCU (RCB) or on the
hybrid control panel is in the AUTO posi-
tion.
OFF: The iris control is invalid when the iris
switch on the RCU (RCB) or on the hybrid
control panel is in the AUTO position.
All Center Top cut BTM cut R/L cut
R B
R B
PED
TOTAL
PED
A
B
ATW
AWC
AUTO
HOLD
ABC
IRIS
MAN
AUTO
1000S/S
ELC
500
100
OFF
SHUTTER SCENE
21 3
USER
SET
AUTO/ATW PAINTING
GAIN
RCU (RCB)
Iris Control
Iris Switch
■Setting and Changing of the
Setting Items (User Mode)
@7 Video Level Adjustment [Picture Level:
–50 - +50]
Convergence level of AUTO IRIS/AGC/ELC can be
adjusted.
@8 Detecting Ratio Adjustment [Light PEAK/AVG:
P50 - A50]
The ratio of AUTO IRIS/AGC/ELC detected peak to
average can be adjusted within a range.
@9 Photometric Measurement Method Setting
[Light Area: All, Center, Top cut, BTM cut, R/L
cut]
A photometric measurement method can be select-
ed for AUTO IRIS/AGC/ELC.
All: All the screen area is measured.
Center: The screen is measured mainly in the cen-
ter area, about one-third of both the top and bot-
tom and one-third of both the right and left por-
tions of the screen are excluded from measure-
ment.
Top cut: About one-third of the top portion of the
screen is excluded from measurement.
BTM cut: About one-third of the bottom portion of
the screen is excluded from measurement.
R/L cut: About one-third of both the right and left
portions of the screen are excluded from mea-
surement.