Panasonic BL-MS102 Panasonic Improves Safety and Efficiency, Remote Control Multi-Camera Capacity

Panasonic Improves Safety and Efficiency

Stores

Factories

Check large areas

Extended-time

in fine detail.

recording even at night.

Remote Pan/Tilt and Zoom Control on TV

SD Memory Card Recording*

Use the remote control to change the

You can record moving or still images onto an

camera's direction, vertically or horizontally,

SD Memory Card even at night when nobody is

while watching the image on TV. For a

operating the system. You can also combine

detailed check, you can enlarge the view

this function with the Automatic Alert Setting,

with the 16x zoom. With the BB-HCM381 or

to record only when there is movement. If you

BB-HCE481, you can use the camera's 21x

need a longer recording capability, just connect

optical zoom for an even closer look.

the system to a DVD or video tape recorder.

*Recording onto an SD Memory Card is not possible in Sequential

1x

Display mode.

SD memory card recording Capacity

Movie Recording Time

SD Capacity

8MB

16MB

32MB

64MB

128MB

256MB

512MB

1GB

2GB

Timer/Sensor

LONG*

1hr.

2hr.

5hr.

10hr.

21hr.

43hr.

87hr.

167hr.

341hr.

Recording

30min.

10min.

40min.

40min.

20min.

10min.

50min.

20min.

Standard

C Series

26sec.

58sec.

2min.

4min.

8min.

16min.

33min.

65min.

2hr.

16x

Recording

16min.

Picture Storage

SD Capacity

8MB

16MB

32MB

64MB

128MB

256MB

512MB

1GB

2GB

No. of

LOW

270

450

940

1930

3900

7780

15680

30170

61340

BL-C10/C30

Pictures

HIGH

160

300

630

1290

2600

5190

10460

20120

40920

Pan (display range: 143˚max)

*Resolution : 320 x 240, Image quality : favor motion,

Tilt (display range: 82˚max)

Image refresh interval : 5 sec.

Entrances

Warehouses

Check visitors

Monitor things

with ease.

periodically.

Automatic Alert Settings

Sequential Display* with Time Stamp

You're alerted immediately when someone

When multiple cameras are used, this function

passes through the entranceway. Even if the TV

automatically switches from one to another. In

is turned off, a buzzer on the adaptor ensures

addition to providing thorough monitoring, it

that no visitors go unchecked.

also lets you display the time. To record, simply

• Three detection methods available: human

connect the system to a DVD or video tape

detection sensor*1 (detects heat), motion

recorder.

detection function*2 (detects light), and

*Set the switch on the back of the BL-WV10 to Sequential Display

external sensor*3.

mode to use.

*1 Applicable models:BL-C10/C30

*2 Applicable models:BB-HCM311/HCM331/HCM371/HCM381/HCE481,

BL-C1/C20/C30

*3 Applicable models: BB-HCM311/HCM331/HCM371/HCM381/HCE481

Motion Detection Function/	Human Detection	Monitoring Image
Setting Browser	Sensor

Other features

Network Connection

and Cell Phone Monitoring

You can monitor over the Internet or an intranet. An Internet connection also lets you monitor right from your cell phone*. When the sensor detects something, it sends the image to you attached to an e-mail message.

*Internet-compatible models only. Images are JPEG only.

Remote Control

& Multi-Camera Capacity

Make all major settings for recording, multi- camera viewing,

and more easily with the remote control.

Part Names [Rear View]

BL-WV10

Factory default reset button

LAN jack section

Video out terminal

DC IN jack Antenna

BL-C30

	Lens	Tripod
		mount
	Lens
	ON/OFF
	switch	Ethernet
Human detection		(LAN) port
			DC IN jack
sensor

Specifications

Network camera			BL-C30			Wireless type
	Image data	JPEG		Wireless	Standards		802.11 b/g
Server	compression system	(Motion JPEG for moving image display)			Antenna		Diversity
	Video resolution	640 x 480, 320 x 240, 160 x 120			Number of channel		11 ch.
	Image quality	3 modes (favor clarity, standard, favor motion)			Transmission speed		up to 54 Mbps.
	Frame rate*1	Max. 7.5 frames/sec. (640 x 480)			Security		WEP 64/128/152 bit
		Max. 15 frames/sec. (320 x 240)			Operating temperature		41˚F to 104˚F (+5˚C to +40˚C)
		Max. 15 frames/sec. (160 x 120)		General	Operating humidity		20 % to 80 % (No condensation)
	Security	User ID/Password			Dimensions (H x W x D)		98 x 74 x 73 mm (Only the unit)
	Buffered images*2	Approx. 250 images: (320 x 240),			Weight		200 g (Only the unit)
		standard image quality			Power supply		AC adaptor:
	Viewing angle	43˚ horizontal (total 143˚)					Input 120 V AC, Output 12 V DC
camera		32˚ vertical (total 82˚)			Consumption		6.4 W
	Revolving speed	Pan: Max. 50˚/sec	Tilt: Max. 50˚/sec
	Number of pixels	Approx. 320,000 pixels
Network	Required light intensity	1 to 10,000 lux			PC performance, etc.
	Lens focal point	Fixed (focal range: 0.5m to ∞ m)
	Lens brightness	F2.8		*1 This varies depending on the subject, image quality, network environment,
				*2 The number of images that can be stored varies depending on the subject.
	Network interface	Ethernet (10 Base-T/100 Base-TX)

Wireless camera	BL-WV10
monitoring system
Interface	• LAN side: Ethernet
	(10 Base-T/100 Base-TX) x 4 ports
	• Video output terminal (composite NTSC) x 1
	• SD Memory Card slot x 1
Supported protocols	• IPv4: TCP, UDP, HTTP, FTP, DHCP
Video resolution	• 640 x 480, 320 x 240
Image quality	• 3 modes (Favor clarity, standard, favor motion)
Image data	• JPEG (Motion JPEG for moving image display)
compression system
Frame rate	• Max. 30 frames/sec (320 x 240)
Security	• User ID/password
Dimensions	• 42 x 220 x 171 mm
(H x W x D)	(excluding antenna and protrusions)
Weight (Main unit only)	• 500 g
Power supply	• AC adaptor: Input 110 V AC, Output 12 V DC
Consumption	• 7.5 W

http://panasonic.co.jp/pcc/products/en/netwkcam/

0M0106SP-MS102WV10-LT.CE.B

All pictures simulated.

Design and specifications are subject to change without notice.