How to Use the On Screen Menu
Three types of information are displayed on the screen. The input signal status, picture adjusting knob status, and the menu display.
Input signal status
1
1.The selected input line (J page 7, 
)
•VIDEO, Y/C, SDI1, SDI2,
2.Signal format
•The display status can be set in “STATUS
DISPLAY” in the “SYSTEM CONFIG” menu (J page 18).
•If “UNSUPPORT SIGNAL” is displayed, then either the current input signal is not supported or the “INPUT SELECT” menu setting needs to be changed.
•When “NO SIGNAL” is displayed, there is no input signal.
Note:
“UNSUPPORT SIGNAL” and “NO SIGNAL” may not be displayed correctly.
Picture adjusting knob status
Picture adjusting knob (J page 7, 
)
• This knob can be rotated and pushed.
• The status display appears when the knob is pushed.
The display disappears when the knob is pushed again, or if the knob is not operated for 10 seconds.
• Settings can only be adjusted in the status display.
• The display position can be changed (J page 18 “ROTARY POSITION”).
Status display:
PHASE, CHROMA, BRIGHT, CONTRAST
Note:
The volume knob status display is not displayed on the screen.
Menu display
• This is displayed when the menu is used.
• The display disappears if remains idle for 2 minutes.
• The display position can be changed (J page 18 “MENU POSITION”).
MENU 
Displays the operation explanation for the menu button.
10