17
CQ-BT5107U
Notes:
¡We shall not guarantee all the functions of the
Bluetooth®device to be connected. When
operations cannot be performed via this unit,
operate the system via the Bluetooth®device.
¡Be aware that the battery of a Bluetooth®device
drains faster if the Bluetooth®device is
connected to this unit.
¡Even when the Bluetooth®device that is
connected to this unit is located near this unit,
sound may be interrupted or noise may be
generated.
¡The Bluetooth®device with over 5-digit PIN
code is not operated with this unit.
¡“DISCONN.” (DISCONNECT) is displayed when
the Bluetooth®device is disconnected.

Setting of PIN (Personal Identity Number) code

1 Hold down [6] for more than 2 seconds to
call the PIN code entry mode.
2 Press [6] to prepare for adjustment.

1st digit blinks

3 Enter a number for each digit.
[s]/[d]: Selects number (0 – 9).
[6] : Selects next digit to be entered.

Digit entered

4 Press [6] to determine the PIN code entry
when last digit is entered.
Completed
Connection of the registered Bluetooth®

device to this unit

1 Press the preset button(s) [1] through [6] to
select the registration number of the
Bluetooth®device of interest. (Refer to the
above.)
2 Hold down [BAND] for more than 2 seconds
for connection.
The Bluetooth®indicator ( ) lights.
Notes:
¡Even if [SRC] (Source) is pressed to change the
source, the connection stays connected.
¡Depending on the communication status, it may
takes 5 to 40 seconds for device connection.

Disconnection of the Bluetooth®device

Hold down [BAND] for more than 2 seconds.
The Bluetooth®indicator ( ) turns off.
Note: When the Bluetooth®device is out of
reception range or encounter serious interference
by outer signal, “ERROR” appears and this unit will
automatically disconnect the connections.

Deletion of the registered data

1 Press the preset button(s) [1] through [6] to
select a registration number assigned to the
Bluetooth®device whose data is to be
deleted. (Refer to the above.)
2 Hold down the preset button [1] through [5]
selected above for the registration number
for more than 2 seconds.
3 Press the preset button that was pressed at
the step above again.
4 Push [SEL].
Deletion
completed
CQ̲BT5107U 10/11/04 10:30 ページ 17