Display Setting
Adjustment to display on the DISPLAY menu
1 Press [MENU] to display the menu display.
For using the remote control, hold down
[SEL] (MENU) for 2
sec. or more.
2 Press []] or [[] to display the DISPLAY menu.
| 3 Turn [VOL] to select a function to be | |
| adjusted. | |
| For using the remote | |
| control, use [}] or | |
Display | [{]. | |
4 Press [PUSH | ||
| ||
| SEL] to adjust. | |
Menu | For using the remote control, use [BAND] (SET). | |
5 Adjust the setting value. | ||
DISPLAY | 7 Press [MENU] to close the menu | |
| 6 Press [PUSH SEL]. | |
| For using the remote control, use [BAND] (SET). | |
| screen. | |
| For using the remote control, hold down [SEL] | |
| (MENU) for 2 sec. or more. |
DEMONSTRATION
Switching by [PUSH SEL].
ON: Demonstration screen at no operation (default)
OFF: Regular screen
GRAPHIC PATTERN
(Default: All)
Turn [VOL] to make a selection.
All: Sequential display from pattern A to C.
Pattern
S.A.:
STILL IMAGE PATTERN
(Default: All)
Turn [VOL] to make a selection.
All: Sequential display from pattern 1 to 10
CONTRAST
(Setting range: 1 to 5, Default: Contrast 3)
q : Tilting up view angle
w : Tilting down view angle
CLOCK ADJ
Note: Adjust the clock when “ADJUST” appears on the display.
[[] : Adjusting minutes
[]] : Adjusting hours
q : Forward
w : Backward
Notes:
¡The graphic pattern and still image are changeable. (a page 31)
¡If corrupted data is selected, “DISPLAY FILE INCOM- PLETE” appears. (a page 32)
30
