Panasonic CQ-VX2200W Installation Guide

32 CQ-VX2200W

23

E

N

G

L

I

S

HWARNING

This installation information is designed for experienced installers

and is not intended for non-technical individuals. It does not contain

warnings or cautions of potential dangers involved in attempting to

install this product.

Any attempt to install this product in a motor car by anyone other

than qualified installer could cause damage to the electrical system

and could result in serious personal injury or death.

❏Overview

This product should be installed by a professional.

However, if you plan to install this product yourself,

your first step is to decide where to install it. The

instructions in these pages will guide you through

the remaining steps: (Please refer to the “WARN-

ING” statement above).

¡Identify and label the car wires.

¡Connect the car wires to the wires of the power

connector.

¡Install the unit in the dashboard.

¡Check the operation of the unit.

If you encounter problems, please consult your

nearest professional installer.

Caution: This unit operates with a 12 volt DC nega-

tive ground auto battery system only. Do not attempt

to use it in any other system. Doing so could cause

serious damage.

Before you begin installation, look for the items on

the right which are packed with your unit.

¡Installation Hardware …… Needed for in-dash

installation

❏Installation Hardware

No. Item Q'ty

q

Binding-Head Screws (5 mm

φ ×

8 mm)

4

wFlat-Head Screws (5

mm

φ × 8 mm) 8

❏Required Tools

You’ll need a screwdriver, a 1.5 volt AAbattery, and

the following:

❏Dashboard Specifications

THICKNESS

MIN. 4.75 mm

MAX. 5.56 mm

182mm

103 mm

12 V DC

Test Bulb

Electrical

Tape

Side-Cut

Pliers

Installation Guide

Contents

Main R INTEGRATED CD/CASSETTE RECEIVER WITH DSP PWR CQ-VX2200W Operating Instructions DISP SPACE REMOTE REVERSE SOURCE OPEN OPEN Safety Information Contents When Driving When Washing Your Car When Parked Use This Product Safely Components 10 Remote Control Battery Installation Control Reference Guide }{ Name of Controls and Functions }{ Behind the Front Panel Volume 12 Power and Basic Operations Mute / ATT (Attenuator) Clock Setting MUTE ON 8:15 8:00 Radio Basics Tuning : Press to select the radio mode : Press to select an FM band : Higher frequency : Lower frequency Press and hold for more than 0.5 seconds then release. Seeking will start. FM1-2 102.70 Preset Station Setting Select a band (step q and won the previous page) Preset Station Calling Auto Preset Memory CD Player Basics Disc Insert / Eject : Press to select the CD mode : Next track Press and hold : Beginning of the current track/ Previous track (Press twice) Track Selection Fast Forward / Reverse Various Way of Listening Random Play Scan Play Repeat Play Notes on CD-R Disc When a Cassette tape is in the player 18 Cassette Tape Player Basics Tape Insert / Eject Fast Forward / Rewind : Press to open the panel : Press to select the cas- sette tape mode SKIP Tape Program Search (TPS) Operation 01-01 106 01-01 106 20 CD Changer Control Press and hold Preparation : Press to select the CD changer mode Disc Selection Various Way of Listening All Tracks First Track on All Discs Disc Scan Track Sound Space and Useful Functions Direct Memory External Sound Source : Press to change to AUX IN mode : Press and hold for more than 2 seconds DM 88.10 DM MEMORY FM1 98.50 <<AUX IN>> Select the station in Radio mode (apage 14) LIVE HOUSE Sound Space and Useful Functions WAVE 24 Display Pattern Arrangement Sound Setting GEQ-1 1.6kHz SOFT1 HEAVY1 Set Adjust the level for each frequency to : Press and hold for more than 2 to : Press After changing to the GEQ adjusting display Sound Setting BAL//FAD 28 Sound Setting POSITION SEL SDBB TYPE4 POSI FRONT Set B:R 2 F:R 1 Balance Fader Other Setting Set SPEANA FAST MUTE KEY AUX IN ON DIMMER MID Installation Guide 32 23 HWARNING Overview Identify All Leads 34 25 Connect All Leads Installation Guide Final Installation Final Checks Precautions CQ-VX2200W CQ-VX2200W Note: Use a pench to bend the fingers on the bracket vertically. Appended Screws (q or w). Select appropriate ones matching the hole shape of the bracket. Electrical Connections Wiring Diagram Page Electrical Connections 38 29 Car TV etc. CQ-VX2200W (Rear) Troubleshooting CD 40 Troubleshooting (continued) Cassette Tape Radio Cassette Tape (continued) Sound Setting Remote Control Troubleshooting (continued) Error Display Messages CD Cassette Tape CD Changer Reset Switch Reset switch Important Maintenance Notes on CD 44 Care of the Unit Notes on Cassette Tape Specifications General FM Stereo Radio AM Radio CD Player