CR-SRF100/CR-SRT100
30
7.5. Channel Mode
The channel mode provides user access to all available channels in sequential order.
(also called “all channels” mode)

ENTERING CHANNEL MODE

You enter channel mode by pressing the [CHANNEL]button. The system indicates entering channel mode by
illuminating the channel mode indicator located next to the channel button. No special message display occurs.

EXITING CHANNEL MODE

You exit channel mode by entering a different mode. There are several ways to do this …
• press the [CATEGORY]button to enter CATEGORY mode.
• press the [PRESET] button to enter PRESET mode.
• enter SETUP mode.
The system indicates exiting channel mode by turning off the channel mode indicator located next to the
channel button.

SELECTING CHANNELS WHILE IN CHANNEL MODE

As the [SEL] knob is rotated, the system will increment or decrement to the next available channel number.
This channel scrolling is independent of categories or presets. For example, if you are on channel 45 (normally
in the ROCK category) and you increment to the next available channel (say 49), this new channel might be
in the JAZZ category. The CDU will wrap around after the low or high channel number is reached.