❏Installation Procedures
●When bending the mounting tab of the mounting collar with a screwdriver, be careful not to injure your hands and fingers.
●We strongly recommend you to wear gloves for installation work to protect yourself from injuries.
Note: Disconnect the cable from the negative
1. Secure the Mounting Collar .
Insert Mounting Collar into the vehicle's dashboard, and bend mounting tabs out with a screwdriver.
Mounting Tab
Dashboard
1 Mounting Collar
Screwdriver
2.Secure the rear of the unit.
a)Insert Power Connector to the unit.
b)Check the electrical connection by referring to this operating instructions.
c) Insert the unit into Mounting Collar and push it in until "click" is heard.
8 Power Connector
Unit
12
