I
NSTALLATION
5
Optional Equipment Connections
VCRs, video disc players, video game equipment, and DSS equipment can also be connected
to the video inputs. See the optional equipmentmanual for details.
Procedure
1. Connect equipment as shown to front or rear Audio/Video input jacks.

Note: Front and rear Audio/Video connectors cannot be operated at the same time.

2. Select the Video mode by pressing TV/VIDEO button.
3. Operate optional equipment as instructed in equipment manual.

Note: If S-VIDEO and VIDEO input are used at the same time, two images will

appear on the TV screen.

IMPORTANT INFORMATION REGARDING USE OF VIDEO GAMES,

COMPUTERS, DSS OR OTHER FIXED IMAGE DISPLAYS.

The extended use of fixed image program material can cause a permanent “shadow image” on
the picture tube. This background image is viewable on normal programs in the form of a
stationary fixed image. This type of irreversible picture tube deterioration can be limited by
observing the following steps:
A. Reduce the brightness/contrast setting to a minimum viewing level.
B. Do not display the fixed image for extended periods of time.
C. Turn the power off when not in actual use.

Note: The marking or retained image on the picture tube resulting from fixed image

use is not an operating defect and as such is not covered by Warranty. This

product is not designed to display fixed image patterns for extended periods

of time.

CABLES NOT SUPPLIED
TERMINALS ON BACK OF TV
VCR
L
R
VIDEO OUT
AUDIO OUT
ANT IN
ANT OUT
TO AUDIO
AMP
VIDEO
S-VIDEO
RL
INPUT
2
1
AUDIO
Jack used for 1/ 8"
headphone plug
(some models)
TERMINALS ON FRONT OF TV
(SOME MODELS)
VIDEO L AUDIO R
0392Eproduction.fm Page 5 Monday, February 26, 2001 5:12 PM